MSZ 1.7139 Structural and constructional steels
Data updates
This material has 472 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
MSZ 1.7139 Chemical Composition
EN 10084: 2008 / Case hardening steels - Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
MSZ 1.7139 Physical Properties
Temperature
This material has 472 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
MSZ 1.7139 Heat Treatments
- End quench test: Quench from 870°C Carburizing: 880 C to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 860 to 900°C; Case hardening: 780 to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
- Soft annealed (+A): 650-700°C Treatment to hardness range (+TH): 850-950°C Treated to ferritic-pearlite structure and hardness range (+FP): 900-1000°C Normalized (+N): 840-870°C
MSZ 1.7139 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
MSZ 1.7139 International Equivalent Materials
Showing 15 of 184 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 184 international equivalents?
See all 184 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 184Cross References
- 48Composition
- 79Mechanical Properties
- 15Physical Properties
- 8Heat Treatment
- 1Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 8Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 129Total Suppliers