PROPRIETARY UK19 Tool steels
Data updates
This material has 119 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UK19 Chemical Composition
Cogne, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UK19 Physical Properties
Temperature
This material has 119 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UK19 Heat Treatments
- Stress relieving: after rough-machining, heat to 650°C-675°C, hold at temperature for at least 2 hours, and consequently cool slowly in furnace to 500°C, then cool in stationary air; Hardening: preheat at 650°C-675°C austenization at 940°C-980°C, air or oil cooling or thermal bath at 500°C-550°C then in air. When the tool has reached the temperature of 50°C-80°C start tempering immediately; Tempering: slow heat to the required temperature for the desired hardness shown in the following chart. Hold at temperature for a minimum of 2 hours after reaching the desired temperature. Make at least 2 temperings.
PROPRIETARY UK19 International Equivalent Materials
Showing 15 of 57 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 57 international equivalents?
See all 57 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 57Cross References
- 5Composition
- -Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 53Total Suppliers