PROPRIETARY Micro-Melt Maxamet Alloy Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-01
Total number of updates: 1
Update History

This material has 15 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt Maxamet Alloy Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
2.15
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Co
VALUE
10.00
UNIT
%
CAS NUMBER
7440-48-4
CRITERIA
Cr
VALUE
4.75
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2
CRITERIA
W
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-33-7

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt Maxamet Alloy Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.72 — 8.027 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 15 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Micro-Melt Maxamet Alloy Heat Treatments

  • Annealing: heat slowly to 871/899°C (1600/1650°F), hold until the entire mass is heated through, and cool slowly (do not exceed 11°C [20°F] per hour) in the furnace to about 538°C (1000°F).
    Hardening: preheat at 816/871°C (1500/1600°F) long enough to ensure a thorough soak. Austenitize at 1038/1218°C (1900/2225°F) for 3-5 minutes, then oil quench. Parts may also be salt quenched to 538°C (1000°F), and air cooled.
    Stress Relieving: heat slowly to 621/677°C (1150/1250°F), hold 1 to 2 hours, then cool in still air.
    Tempering: tempering temperature s usually in the range 538/593°C (1000/1100°F). For austenitizing temperatures of 1177°C (2150°F) or below, a minimum of a double temper is desired. For austenitizing temperatures above 1177°C (2150°F), a triple temper with an included refrigeration step of -70°C (-100°F) after the first temper is suggested.

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 9Composition
  • -Mechanical Properties
  • 4Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers