ISO X3CrNiMo17-12-3 Stainless steels
Data updates
This material has 1096 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ISO X3CrNiMo17-12-3 Chemical Composition
ISO 16143-2: 2014 / Stainless steels for general purposes - Part 2: Semi-finished products, bars, rods and sections
Looking for full material performance data?
Free registration required • Instant access
ISO X3CrNiMo17-12-3 Physical Properties
Temperature
This material has 1096 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ISO X3CrNiMo17-12-3 Heat Treatments
- Hot forming: 1150-850°C, air cooling; Solution annealing (+AT): 1030-1110°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, and a temperature of 1020°C for steels with Mo contents exceeding 3%.
- Hot forming: 1200-900°C, air cooling; Solution annealing (+AT): 1020-1120°C, water or air rapid cooling. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3%, a temperature of 1020°C for steels with Mo contents exceeding 3%.
ISO X3CrNiMo17-12-3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ISO X3CrNiMo17-12-3 International Equivalent Materials
Showing 15 of 487 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 487 international equivalents?
See all 487 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 487Cross References
- 72Composition
- 133Mechanical Properties
- 19Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 17Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 49Joints
- -Coatings
- 17Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 300Total Suppliers