STAS 18 CrNi 20 XS Structural and constructional steels
Data updates
This material has 35 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
STAS 18 CrNi 20 XS Chemical Composition
STAS 791: 1988 / Alloy steels for heat treatment, for machine-building industry. Grades and technical requirements for quality
Looking for full material performance data?
Free registration required • Instant access
STAS 18 CrNi 20 XS Physical Properties
Temperature
This material has 35 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
STAS 18 CrNi 20 XS Heat Treatments
- Hardening in the range 840-870°C, quenching in oil, re-heating in the range 800-830°C, quenching in oil; Tempering in the range 170-210°C, cooling in oil or air.
Temperature of austenitization 840°C.
Hot plastic deformation:
- Forging and hot rolling: 1180-800°C
- Die forging: 1150-900°C.
Annealing in the range 650-700°C, furnace cooling; Cementation in the range 900-950°C, oil cooling or batch furnace cooling; Hardening (I) in the range 840-870°C, oil cooling; Intermediate cooling in the range 630-650°C; furnace cooling; Hardening (II) in the range 800-830°C, oil cooling; Tempering in the range 170-210°C, air or oil cooling.
STAS 18 CrNi 20 XS Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
STAS 18 CrNi 20 XS International Equivalent Materials
Showing 3 of 9 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 9 international equivalents?
See all 9 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 9Cross References
- 9Composition
- 13Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers