PN 15HN Structural and constructional steels
Data updates
This material has 178 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PN 15HN Chemical Composition
PN-H-84030-02: 1989 / Structural alloy steel - Carburizing steel - Grades
Looking for full material performance data?
Free registration required • Instant access
PN 15HN Physical Properties
Temperature
This material has 178 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PN 15HN Heat Treatments
- The sample taken in long. direction: Hardening in oil or water at 860°C then Tempering in air at 190°C; Common HT: Heated for open die forging: 1100-850°C or for Die forging 1150-850°C; Softened at T= 650-700°C; Normalized at T= 850-890°C; Carbonized with powder at T=880-950°C or salt bath at T= 900-950°C or gas at T=880-950°C. Cooling in oil (water) or steam water at T=160-250°C or air; Hardened at T=850-890°C and cooled in water or oil or steam water at 160-250°C; Annealed at T=630-650°C than cooled in the furnace; Re-hardened at T=800-840°C, cooled in water (oil) or steam water at 160-250°C. Tempered at 170-200°C; Hardened without carburized: 870±10°C, oil. It is recommended tempering temperature (180 ± 10)°C.
PN 15HN Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PN 15HN International Equivalent Materials
Showing 15 of 75 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 75 international equivalents?
See all 75 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 75Cross References
- 12Composition
- 32Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 54Total Suppliers