ASME SA-723 Grade 3 Class 2 Structural and constructional steels
Data updates
This material has 178 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-723 Grade 3 Class 2 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-723 Grade 3 Class 2 Physical Properties
Temperature
This material has 178 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-723 Grade 3 Class 2 Heat Treatments
- Heat treatment shall consist of normalizing (which may be part of the preliminary treatment), reaustenitization, liquid quenching, and tempering. The forgings shall be quenched in a suitable liquid medium by spraying or immersion. Quenching shall be followed by tempering at a minimum temperature of 540°C (1000°F). The minimum time at tempering temperature shall be 1.2 minutes/mm of maximum section thickness, unless otherwise agreed between supplier and purchaser.
ASME SA-723 Grade 3 Class 2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-723 Grade 3 Class 2 International Equivalent Materials
Showing 11 of 12 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 12 international equivalents?
See all 12 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 12Cross References
- 9Composition
- 37Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 35Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers