ASME SA-487 Grade CA15 Class B Cast steels
Data updates
This material has 47 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade CA15 Class B Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-487 Grade CA15 Class B Physical Properties
Temperature
This material has 47 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-487 Grade CA15 Class B Heat Treatments
- Castings shall be heat treated as follows:
Austenitized at 955°C (1750°F), air cooled or liquid quenched to below 205°C (400°F) and tempered at 595°C (1100°F) minimum.
Preliminary heat treatment prior to final heat treatment as well as multiple tempering is permitted. Heat treatment shall be performed after the castings have been allowed to cool below the transformation range.
If castings are welded, they shall be post welded heat treated at a temperature of 595°C (1100°F) minimum, (the post weld heat treatment temperature must be at or below the final tempering temperature), or re-heat treated as detailed above. The minimum pre-heat temperature prior to welding shall be 205°C (400°F).
ASME SA-487 Grade CA15 Class B Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-487 Grade CA15 Class B International Equivalent Materials
Showing 11 of 24 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 24 international equivalents?
See all 24 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 24Cross References
- 12Composition
- 4Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 4Total Suppliers