ASME SA-213 Grade TP 304L Stainless steels
Data updates
This material has 2124 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 Grade TP 304L Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-213 Grade TP 304L Physical Properties
Temperature
This material has 2124 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 Grade TP 304L Heat Treatments
- Solution treatment; Austenitizing/Solutioning temperature min. 1040°C (1900°F).
Quenched in water or rapidly cooled by other means, at a rate sufficient to prevent re-precipitation of carbides, as demonstrable by the capability of tubes, heat treated by either separate solution annealing or by direct quenching.
Cooling Media: water or other rapid cool.
Grade may be specified in the stress-relieved annealed condition: tubes shall be given a heat treatment at 815 to 900°C (1500 to 1650°F) after roll straightening. Cooling from this temperature range may be either in air or by slow cooling. No mechanical straightening is permitted after the stress-relief treatment.
ASME SA-213 Grade TP 304L Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-213 Grade TP 304L International Equivalent Materials
Showing 15 of 395 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 395 international equivalents?
See all 395 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 395Cross References
- 7Composition
- 51Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 113Creep
- -Joints
- -Coatings
- 21Dimensions
- -Tribology
- 1236Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 216Total Suppliers