ASME SA-333 Grade 4 Structural and constructional steels
Data updates
This material has 174 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-333 Grade 4 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-333 Grade 4 Physical Properties
Temperature
This material has 174 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-333 Grade 4 Heat Treatments
- Normalize by heating to a uniform temperature of not less than 815°C (1500°F) and cool in air or in the cooling chamber of an atmosphere controlled furnace. Normalize, at the discretion of the manufacturer, reheat to a suitable tempering temperature. For the seamless process only, reheat and control hot working and the temperature of the hot-finishing operation to a finishing temperature range from 845 to 945°C (1550 to 1750°F) and cool in air or in a controlled atmosphere furnace from an initial temperature of not less than 845°C (1550°F)
ASME SA-333 Grade 4 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-333 Grade 4 International Equivalent Materials
Showing 4 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 9Composition
- 45Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 25Creep
- -Joints
- -Coatings
- 3Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers