SS 0727 Cast irons
Data updates
This material has 16 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SS 0727 Chemical Composition
SS 140727: 1981 / Spheroidal graphite iron - SS-cast iron 07 22
Looking for full material performance data?
Free registration required • Instant access
SS 0727 Heat Treatments
- Stress relief annealing refers to reducing internal stresses in the material without affecting the strength properties. For cast iron 07 27, 550-650°C and a holding time of 1 h for every 25 mm of material thickness, but at least 1 h. Free cooling or, if the shape of the material so requires, cooling in a furnace to 350°C and then free cooling. Normalizing involves heating to about 900°C and then relatively rapid cooling to about 650°C, possibly followed by stress relief annealing. Quenching increases strength and hardness. The material is cooled in oil from 840-880°C and then tempered to the desired hardness. Bainite hardening increases strength and hardness. The material is austenitized at 840-880°C, followed by isothermal transformation at 300-400°C in a salt bath. Surface hardening can be achieved by flame hardening or induction hardening.
SS 0727 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SS 0727 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 7Composition
- 7Mechanical Properties
- -Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers