SS 07 17 Cast irons
Data updates
This material has 32 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SS 07 17 Chemical Composition
SS 14 07 17: 1981 / Spheroidal graphite iron
Looking for full material performance data?
Free registration required • Instant access
SS 07 17 Heat Treatments
- Can be heat treated in different ways. The most common heat treatments are:
- Relaxation annealing
- Ferritizing soft annealing
- Bainite hardening;
Relaxation annealing is intended to reduce internal stresses in the material without affecting the strength properties. For cast iron 07 17, 550 - 625°C and a holding time of 1 hour are recommended every 25 mm wall thickness, however at least 1 h. Free cooling.
Ferritizing soft annealing results in high elongation values. The goods are heat-treated at 800 - 900°C after which it is allowed to cool slowly to a temperature below about 500 - 600°C.
Bainite hardening increases strength and hardness. The goods are austenitized at 840 - 880°C, followed of isothermal conversion at 300 - 400°C in a salt bath.
SS 07 17 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SS 07 17 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 7Composition
- 23Mechanical Properties
- -Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers