JIS SQV3A Structural and constructional steels
Data updates
This material has 666 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
JIS SQV3A Chemical Composition
G 3120: 2022 / Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates quenched and tempered for pressure vessels
Looking for full material performance data?
Free registration required • Instant access
JIS SQV3A Physical Properties
Temperature
This material has 666 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
JIS SQV3A Heat Treatments
- The heat treatment of steel plates shall be as follows.
a) Steel plates shall be quenched and tempered unless otherwise agreed between the purchaser and the manufacturer. Quenching at 845 to 980°C and tempering at 595°C or over. The steel plates shall be quenched in water after being heated. They shall be tempered while held at that temperature for 30 min or longer per 25 mm in thickness after being heated to a suitable temperature. The minimum holding time shall be 30 min.
b) If the purchaser replaces quenching and specified in a) with other heat treatment, the steel plates shall be as rolled, heat treated by stress relieving annealing, or heat treated by the means as specified, in all cases to be selected by the agreement between the purchaser and the manufacturer.
Steel plates, especially those with thickness of 25 mm or over should be heat treated by stress relieving annealing, because steel plates as rolled are liable to produce cracks by the time the plates are processed by the purchaser; Holding time should be [(1.2 x thickness) min] or over
JIS SQV3A Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
JIS SQV3A International Equivalent Materials
Showing 15 of 48 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 48 international equivalents?
See all 48 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 48Cross References
- 13Composition
- 25Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- 16Creep
- -Joints
- -Coatings
- 514Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 45Total Suppliers