UNI 20NiCrMo2 Structural and constructional steels
Data updates
This material has 669 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNI 20NiCrMo2 Chemical Composition
EN ISO 683-17: 1999 / Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
Looking for full material performance data?
Free registration required • Instant access
UNI 20NiCrMo2 Physical Properties
Temperature
This material has 669 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNI 20NiCrMo2 Heat Treatments
- Hot worked at 1100-900°C; Cementation at 870-900°C; Core hardened at 850-880°C; Surface hardened at 800-830°C. Quenched in hot water bath; Stress relieved at 150-200°C.
- Material is normally supplied in the hot rolled condition but subject to agreement may be supplied in one of the following conditions: Soft Annealed (SA). Spheroidise Annealed (Spheroidised). Annealed to obtained a lamellar ferrite and pearlite structure (Annealed). The H + T values shown in the mechanical properties table are obtained from an 11mm test bar hardened by oil quenching from 860°C +/- 10°C after holding at temperature for at least 30 minutes, and tempered at 180°C +/- 10°C for at least 1 hour. Final Heat Treatment: Case harden at 870 - 900°C. Harden the core by oil quenching from 850 - 880°C. Harden the case by oil quenching from 800 - 830°C. Finally, temper at 150 - 200°C.
UNI 20NiCrMo2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNI 20NiCrMo2 International Equivalent Materials
Showing 15 of 309 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 309 international equivalents?
See all 309 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 309Cross References
- 39Composition
- 43Mechanical Properties
- 3Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 83Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 188Total Suppliers