AFNOR NF 15 CD 2.05 Structural and constructional steels
Data updates
This material has 130 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF 15 CD 2.05 Chemical Composition
NF A 36-602: 1988 / Weldable steel forgings for boilers and pressure vessels. Mo, Mn-Mo and Cr-Mo alloy steels. Grades and types
Looking for full material performance data?
Free registration required • Instant access
AFNOR NF 15 CD 2.05 Physical Properties
Temperature
This material has 130 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF 15 CD 2.05 Heat Treatments
- Austenitized (normalized or hardened): 875-925°C Tempered : >= 625°C
- Normalised: 875-925°C, air or water cooled.
Tempered: 650-700°C.
Mechanical characteristics are also guaranteed after the following relaxation treatment:
- temperature rise 55°C/h from 300°C
- temperature maintenance at ± 5 °C, at a value taken in the temperature range 630 - 680°C
- temperature holding time 2 min/mm up to 60 mm thickness + 0.5 min/mm above 60 mm thickness
- temperature drop 55°C/h down to 300°C then air cooling
AFNOR NF 15 CD 2.05 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFNOR NF 15 CD 2.05 International Equivalent Materials
Showing 2 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 29Composition
- 48Mechanical Properties
- 39Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- 6Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers