SEW GS-19CrMo910 Cast steels
Data updates
This material has 71 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SEW GS-19CrMo910 Chemical Composition
SEW 520: 1990 / High-strength cast steel with good weldability - Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
SEW GS-19CrMo910 Physical Properties
Temperature
This material has 71 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SEW GS-19CrMo910 Heat Treatments
- Quenched at ≤ 980°C
Tempered at 630-680°C
Stress relief annealed at ≥ 600°C. This temperature must be at least 30°C below the tempering temperature and must not be below the specified minimum value - Quenching and tempering:
Strength level I: Austenitized at 920-980°C, quenched in fluid, tempered at 630-680°C
Strength level II: Austenitized at 920-980°C, quenched in fluid, tempered at 580-630°C
The temperature for the stress relief heat treatment should be at least 20°C, but at most 50°C below the applied tempering temperature of the casting
SEW GS-19CrMo910 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SEW GS-19CrMo910 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 14Composition
- 34Mechanical Properties
- 7Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 2Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers