46 CrS 2 (Germany / DIN) Material Properties

Other designations:
Material group: Ferrous Alloys / Structural and constructional steels
Country/Standard: Germany / DIN

Data updates

Latest Update: 2019-06
Total number of updates: 1
Update History:

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
MPa view details
Tensile Strength 650 — 1100 MPa view details
Elongation, A 12 % view details
Reduction of Area val1
Full data access requires a free trial. Sign Up Free
% view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details
Brinell Hardness (HB) ≤ 255 view details
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
ksi view details
Tensile Strength 94.3 — 159.5 ksi view details
Elongation, A 12 % view details
Reduction of Area val1
Full data access requires a free trial. Sign Up Free
% view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
ft·lb view details
Brinell Hardness (HB) ≤ 255 view details

Physical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Modulus of Elasticity 190 — 210 GPa view details
Density 7.67 — 7.86 kg/dm³ view details
Poisson Coefficient 0.27 — 0.3 view details
Modulus of Elasticity 27.6 E+03 — 30.5 E+03 ksi view details
Density 0.277 — 0.284 lb/in³ view details
Poisson Coefficient 0.27 — 0.3 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.4200 – 0.5000
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
0.4000 – 0.6000
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
0.5000 – 0.8000
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
P
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3

DIN 1652-4: 1990 / Bright steel made from steel for quenching and tempering; technical delivery conditions

Heat Treatments

  • Austenitizing (quenching in water or oil): 820-860°C, t > 30 min. NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used. Tempering: 540-680°C, t > 60 min. A mandatory end quench test shall be carried out at 850+/- 5°C.