DIN 46 Cr 2 Structural and constructional steels
Data updates
This material has 385 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 46 Cr 2 Chemical Composition
DIN 1652-4: 1990 / Bright steel made from steel for quenching and tempering; technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
DIN 46 Cr 2 Physical Properties
Temperature
This material has 385 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 46 Cr 2 Heat Treatments
- Austenitizing (quenching in oil or water): 820-860°C, (at least 30 min). NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used; Tempering: 540-680°C, (at least 60 min); End quench test: 850±5°C.
- Austenitizing (quenching in water or oil): 820-860°C, t > 30 min. NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used. Tempering: 540-680°C, t > 60 min. A mandatory end quench test shall be carried out at 850+/- 5°C.
DIN 46 Cr 2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 46 Cr 2 International Equivalent Materials
Showing 15 of 100 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 100 international equivalents?
See all 100 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 100Cross References
- 43Composition
- 124Mechanical Properties
- 3Physical Properties
- 17Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 3Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 4Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 91Total Suppliers