WL 1.8544 Structural and constructional steels
Data updates
This material has 240 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
WL 1.8544 Chemical Composition
WL 1.8544 / Chromium-aluminium-molybdenum nitriding steel with about 0.34 C - 1.1 Cr - 1 Al - 0.2 Mo; rods and forgings
Looking for full material performance data?
Free registration required • Instant access
WL 1.8544 Physical Properties
Temperature
This material has 240 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
WL 1.8544 Heat Treatments
- Annealed at 650 to 700°C; Hardened at 900 to 940°C oil or water tempered at 570 to 650°C;
- The material is to relax before nitriding at least 550°C. The surface needs to be nitrated grease and decarburization. Usually is nitrided at 500°C to 520°C. The nitriding time depends on the desired layer depth.
WL 1.8544 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
WL 1.8544 International Equivalent Materials
Showing 15 of 108 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 108 international equivalents?
See all 108 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 108Cross References
- 16Composition
- 11Mechanical Properties
- 10Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 92Total Suppliers