DIN 1.7323 Structural and constructional steels
Data updates
This material has 293 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.7323 Chemical Composition
EN 10263-3: 2017 / Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
Looking for full material performance data?
Free registration required • Instant access
DIN 1.7323 Physical Properties
Temperature
This material has 293 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.7323 Heat Treatments
- Carburizing at 880 - 980°C. Core-hardening at 860 - 900°C, case hardening at 780 - 820°C, quenching. Tempering at 150 - 200°C.
- End quench test: Quench from 910°C Carburizing: 880 to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 860 to 900°C; Case hardening: 780 to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
DIN 1.7323 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.7323 International Equivalent Materials
Showing 15 of 110 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 110 international equivalents?
See all 110 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 110Cross References
- 38Composition
- 39Mechanical Properties
- 3Physical Properties
- 7Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 3Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 93Total Suppliers