WL 1.4534 Stainless steels
Data updates
This material has 518 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
WL 1.4534 Chemical Composition
WL 1.4534: 1984 / Ultra high-strength precipitation-hardening stainless chromium-nickel-molybdenum-aluminium steel with about 0.04C-13Cr-8Ni-2.2Mo-1Al; rods and forgings
Looking for full material performance data?
Free registration required • Instant access
WL 1.4534 Physical Properties
Temperature
This material has 518 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
WL 1.4534 Heat Treatments
- Solution heat-treated and quenched: Solution annealing (925 +/- 15) °C / air or oil <16°C; Quenched and tempered or precipitation treated to lower strength: Solution heat-treated and quenched (550-570°C 4h/air normaly aged; Quenched and tempered or precipitation treated: Solution heat-treated and quenched (530-550°C 4h/air normaly aged; Quenched and tempered or precipitation treated to higher strength: Solution heat-treated and quenched (500-520°C 4h/air normaly aged;
- Solution heat-treated: (925 ± 15)°C/air, oil or water < 16°C
Precipitation heat treated: 530 °C to 550 °C 4 h/air (Lower strength - 550°C to 570°C 4 h/air; Higher strength - 500°C to 520°C 4 h/air)
WL 1.4534 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
WL 1.4534 International Equivalent Materials
Showing 15 of 203 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 203 international equivalents?
See all 203 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 203Cross References
- 20Composition
- 98Mechanical Properties
- 29Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 12Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 154Total Suppliers