DIN 1.1333 Structural and constructional steels
Data updates
This material has 267 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1333 Chemical Composition
Pressure- and activity-retaining components of systems outside the primary circuit Part 1: Materials, KTA 3211.1, 2000
Looking for full material performance data?
Free registration required • Instant access
DIN 1.1333 Physical Properties
Temperature
This material has 267 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1333 Heat Treatments
- Normalization: 900 to 950°C, cooling in stationary air after the temperature has been reached over the entire cross section; Stress-relief annealing: 530 to 580°C; The heating and cooling rate, the temperature and the holding time shall be defined by the manufacturer and processor as a function of dimensions of the part, chemical composition and preceding heat treatments such that the requirements for mechanical and technological characteristics are met even allowing for subsequent heat treatments for the final condition of the complete part. Claddings shall also be taken into consideration (corrosion resistance, ductility).
DIN 1.1333 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.1333 International Equivalent Materials
Showing 15 of 51 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 51 international equivalents?
See all 51 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 51Cross References
- 14Composition
- 128Mechanical Properties
- 23Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 42Total Suppliers