B.S. 50CrMo4 Structural and constructional steels
Data updates
This material has 657 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. 50CrMo4 Chemical Composition
EN 10083-1: 1991 / Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)
Looking for full material performance data?
Free registration required • Instant access
B.S. 50CrMo4 Physical Properties
Temperature
This material has 657 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. 50CrMo4 Heat Treatments
- Austenitizing (quenching in oil): 820-860°C, t > 30 min. Synthetic quenchants may also be used. Tempering: 540-680°C, t > 60 min. A mandatory end quench test shall be carried out at 850+/- 5°C.
- Austenitizing (quenching in oil): 820-870°C, (at least 30 min). NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used; Tempering: 540-680°C, (at least 60 min); End quench test: 850±5°C.
B.S. 50CrMo4 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. 50CrMo4 International Equivalent Materials
Showing 15 of 172 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 172 international equivalents?
See all 172 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 172Cross References
- 73Composition
- 163Mechanical Properties
- 16Physical Properties
- 20Heat Treatment
- 2Metallography
- -Machinability
- 32Stress-Strain
- -Formability
- 12Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 46Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 121Total Suppliers