PROPRIETARY VW3 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2022-01
更新总数: 1
更新历史
PROPRIETARY VW3 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
0.4000 – 0.5500
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
1.0000 – 1.8000
单位
%
CAS 编号
7440-47-3
化学元素
Mn
数值
0.1000 – 0.4000
单位
%
CAS 编号
7439-96-5
Aços Inajá Ltda, Product Data Sheet,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY VW3 物理性能
PROPRIETARY VW3 热处理
- Stress relief: The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: The heat for quenching should be between 910 and 940°C. It is recommended to pre-warm the tools.
Cool in:
Appropriate oil, with agitation and heated between 40 and 70°C.
Molten salt bath, kept between 180 and 230°C.
Calm air.
It cannot be vacuum quenched.
Tempering: The tools must be tempered immediately after tempering, as soon as they reach 60°C. Make at least 2 tempers and between each temper the parts must cool down to room temperature. Tempering temperatures should be chosen depending on the desired hardness. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension. Allow 1 hour for each inch of thickness.
PROPRIETARY VW3 机械性能
PROPRIETARY VW3 国际等效材料
显示 15 / 67 条结果。
材料牌号
标准
国家与地区 / 生产商
近似类型
等效类别反映化学成分和机械性能的比较 — 请始终根据适用于您应用的相关规范验证适用性。
根据您的应用场景优化材料选择 - 预约演示
- 67交叉引用
- 14化学成分
- 1机械性能
- 6物理性能
- 2热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 54供应商总数