PROPRIETARY Uddeholm Nimax 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2016-05
更新总数: 1
更新历史
PROPRIETARY Uddeholm Nimax 化学成分
化学元素
数值
单位
CAS 编号
Uddeholms AB, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Uddeholm Nimax 物理性能
PROPRIETARY Uddeholm Nimax 热处理
- The hardness cannot be increased by heat treatment, but can be decreased by tempering. However, tempering is not recommended because it significantly decreases toughness in spite of the fact that the hardness is reduced.
If material has been exposed to high temperature thus reducing toughness and hardness heat to 850°C (1560°F), hold for 30 minutes and cool in circulating air in order to restore original properties.
Nitriding: rough machining, temper at 480-525°C (896-977°F) thus reducing the amount of stresses and retained austenite content. Heat the mold up until it is heated through and let it cool down to room temperature, finish machining/grinding and gas nitriding at 510°C (950°F) or plasma nitriding at 480°C (896°F).
PROPRIETARY Uddeholm Nimax 机械性能
温度
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 6化学成分
- 7机械性能
- 8物理性能
- 1热处理
- 19金相组织
- -切削加工性能
- 1应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 5供应商总数