PROPRIETARY Uddeholm Elmax SuperClean 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2016-04
更新总数: 1
更新历史
PROPRIETARY Uddeholm Elmax SuperClean 化学成分
化学元素
数值
单位
CAS 编号
Böhler-Uddeholm AG, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Uddeholm Elmax SuperClean 物理性能
PROPRIETARY Uddeholm Elmax SuperClean 热处理
- Soft annealing: Protect the steel and heat through to 980°C, holding time 2h. Then cool in furnace 20°C/h to 850°C. Holding time 10h. Cool slowly to 750°C. Then freely in air.
Stress-relieving: After rough machining the tool should be heated through to 650°C, holding time 2 hr. Cool slowly to 500°C then freely in air.
Hardening: Preheating temperature: 600-850°C. Austenitizing temperature: 1050-1100°C, normally 1080°C. (At 1050°C - holding time: 30 min, hardness before tempering: 60 HRC; at 1080°C - holding time: 30 min, hardness before tempering: 61 HRC.);
Tempering: Choose the tempering temperature according to the hardness required by reference to the tempering graph. Temper twice with intermediate cooling to room temperature, the preferred tempering temperature is 250°C or higher. In exceptional cases, a minimum tempering temperature of 180°C can be used for small simple inserts and parts where toughness is of less importance. Holding time at tempering temperature minimum 2 h;
Quenching media: Forced air/gas, Fluidized bed or salt bath 200-550°C, then cool in air. (In order to obtain optimum properties, the cooling rate should be as fast as is concomitant with acceptable distortion. Temper immediately the tool reaches 50-70°C.
PROPRIETARY Uddeholm Elmax SuperClean 机械性能
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 6化学成分
- 7机械性能
- 14物理性能
- 5热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 5供应商总数