PROPRIETARY Micro-Melt T15 Alloy 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2022-01
更新总数: 1
更新历史
PROPRIETARY Micro-Melt T15 Alloy 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
1.60
单位
%
CAS 编号
7440-44-0
化学元素
Co
数值
5.00
单位
%
CAS 编号
7440-48-4
化学元素
Cr
数值
4.25
单位
%
CAS 编号
7440-47-3
Carpenter Technology Corporation, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Micro-Melt T15 Alloy 物理性能
PROPRIETARY Micro-Melt T15 Alloy 热处理
- Annealing: Heat slowly to 871/899°C (1600/1650°F), hold until the entire mass is heated through, and cool slowly (do not exceed 11°C [20°F] per hour) in the furnace to about 538°C (1000°F), after which the cooling rate may be increased.
Hardening: preheat to 816/871°C (1500/1600°F), equalize, and transfer to a furnace maintained at the desired hardening temperature. Austenitize at 1093/1232°C (2000/2250°F) for 5 to 45 minutes, depending on the austenitizing time to be used. Quench in oil and be sure that tools are cooled below 93°C (200°F) before tempering. Small sizes under about 25.4mm (1”) in diameter, or delicate sections, may be hardened by cooling in still air. It is also acceptable to quench in molten salt at temperatures of 538/593°C (1000/1100°F), equalizing for 5 minutes per inch, followed by air cooling.
Stress Relieving: heat slowly to 621/677°C (1150/1250°F), allow to equalize, then cool in still air.
Tempering: tempering temperature is usually in the range of 510/621°C (950/1150°F).
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 9化学成分
- -机械性能
- 8物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 1供应商总数