PROPRIETARY Micro-Melt M3 Class 2 Alloy 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2022-03
更新总数: 1
更新历史
PROPRIETARY Micro-Melt M3 Class 2 Alloy 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
1.25
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
4.00
单位
%
CAS 编号
7440-47-3
化学元素
Fe
数值
余量
单位
%
CAS 编号
7439-89-6
Carpenter Technology Corporation, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Micro-Melt M3 Class 2 Alloy 物理性能
PROPRIETARY Micro-Melt M3 Class 2 Alloy 热处理
- Annealing: heat slowly to 857/885°C (1575°F/1625°F), hold until the entire mass is heated through, and cool slowly (not to exceed 11°C [20°F] per hour) in the furnace to about 538°C (1000°F), after which the cooling rate may be increased.
Hardening: preheat at 816/871°C (1500/1600°F) in a neutral salt bath. After thorough preheating, transfer to a furnace with a temperature maintained at 1204/1232°C (2200/2250°F) and oil quench. Small sizes, under about 25.4 mm (1") in diameter, or delicate sections may be hardened by cooling in still air. It is also acceptable to quench in molten salt at temperatures of 548/593°C (1000/1100°F), equalizing for 5 minutes per 25.4 mm, followed by air cooling.
Stress Relieving: to relieve the strains of machining, heat slowly to 621/677°C (1150/1250°F), allow to equalize, then cool in still air. Tempering: the tempering temperature may be varied according to the desired hardness but is usually in the range of 538/566°C (1000/1050°F).
PROPRIETARY Micro-Melt M3 Class 2 Alloy 国际等效材料
显示 9 / 12 条结果。
材料牌号
标准
国家与地区 / 生产商
近似类型
等效类别反映化学成分和机械性能的比较 — 请始终根据适用于您应用的相关规范验证适用性。
根据您的应用场景优化材料选择 - 预约演示
- 12交叉引用
- 9化学成分
- -机械性能
- 5物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 7供应商总数