PROPRIETARY Micro-Melt A11 Tool Steel 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2022-02
更新总数: 1
更新历史
PROPRIETARY Micro-Melt A11 Tool Steel 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
2.45
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
5.30
单位
%
CAS 编号
7440-47-3
化学元素
Fe
数值
余量
单位
%
CAS 编号
7439-89-6
Carpenter Technology Corporation, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Micro-Melt A11 Tool Steel 物理性能
PROPRIETARY Micro-Melt A11 Tool Steel 热处理
- Annealing: heat slowly to 871/899°C (1600/1650°F), hold for 2 hours, cool slowly at a rate of 11/22°C (20/40°F) per hour to 538°C (1000°F), then air cool. Typical annealed hardness will be 255 to 277 Brinell. Hardening: preheat to 816/843°C (1500/1550°F), equalize, and transfer to a furnace maintained at the desired hardening temperature. Austenitize at 1010/1177°C (1850/2150°F) for 5 - 60 minutes, depending on the austenitizing temperature used. For best toughness combined with good wear resistance, austenitize at 1066°C (1950°F) for 30-60 minutes, then air cool to room temperature. Temper immediately to HRC 58/61. For balanced toughness and wear resistance, austenitize at 1121°C (2050°F) for 20 to 40 minutes, fan air cool, oil quench, or salt quench to 538°C (1000°F) followed by an air cool to room temperature. Temper immediately to HRC 60/62. For the maximum wear resistance at some sacrifice in toughness, austenitize at 1177°C (2150°F) for 5 to 10 minutes, oil quench. Temper immediately to HRC 63/65.
Stress Relieving: first, rough machine, then heat to a temperature of 621/677°C (1150/1250°F), equalize, and cool slowly in still air.
Tempering: tempering is usually performed in the temperature range of 538/593°C (1000/1100°F).
根据您的应用场景优化材料选择 - 预约演示
- 6交叉引用
- 8化学成分
- -机械性能
- 11物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- 2摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 1供应商总数