Cross-reference tables for DIN aluminium wrought alloys: Part One
Abstract
Cross-reference tables between alphanumeric and numeric temper designations for wrought aluminum alloys according to DIN 1788 and DIN 1790 standard specifications are given in this article. It covers sheets and strips with thickness from 0,021 to 0,035mm and aluminium alloy wires.
DIN 1788
Sheet and strip of wrought aluminum and aluminum alloys, with thickness from 0.021 to 0.350 mm, mechanical properties
| Alphanumeric designation (Kurzzeichen) | Numeric designation (Werkstoff-nummer) |
|
| AI99,98R | W4 | 3.0385.10 |
| F14 | .32 | |
| Al99,5 | W6 | 3.0255.10 |
| W7 | .10 | |
| F9 | .24 | |
| F11 | .26 | |
| G11 | .27 | |
| F13 | .30 | |
| G13 | .31 | |
| F15 | .32 | |
| F18 | .34 | |
| Al99 | W6 | 3.0205.10 |
| W7 | .10 | |
| W8 | .10 | |
| F12 | .26 | |
| F14 | .30 | |
| F16 | .32 | |
| F19 | .34 | |
| AlFeSi | W8 | 3.0915.10 |
| F11 | .24 | |
| G11 | .25 | |
| F13 | .26 | |
| G13 | .27 | |
| F15 | .28 | |
| G15 | .29 | |
| F17 | .30 | |
| F20 | .32 | |
| AlMnCu | W10 | 3.0517.10 |
| G13 | .25 | |
| F15 | .26 | |
| G15 | .27 | |
| F17 | .28 | |
| G17 | .29 | |
| F19 | .30 | |
| AlMn0.5Mg0.5 | W11 | 3.0505.10 |
| G16 | .25 | |
| F17 | .26 | |
| G17 | .27 | |
| F20 | .28 | |
| G20 | .29 | |
| F22 | .30 | |
| F24 | .32 | |
| AlMn1Mg0,5 | W13 | 3.0525.10 |
| G17 | .25 | |
| G21 | .31 | |
| F25 | .32 | |
| AlMn1Mg1 | W16 | 3.0526.10 |
| F19 | .24 | |
| G19 | .25 | |
| F21 | .26 | |
| G21 | .27 | |
| F23 | .28 | |
| G23 | .29 | |
| F25 | .30 | |
| G25 | .31 | |
| F28 | .32 | |
| AlMg1 | W11 | 3.3315.10 |
| G12 | .25 | |
| F15 | .26 | |
| G15 | .27 | |
| F17 | .28 | |
| F19 | .30 | |
| F22 | .32 | |
| AlMg2,5 | W18 | 3.3523.10 |
| G26 | .29 | |
| F32 | .34 | |
| AlMg3 | W19 | 3.3535.10 |
| F24 | .26 | |
| G24 | .27 | |
| F27 | .28 | |
| G27 | .29 | |
| F29 | .30 | |
| G29 | .31 | |
| F32 | .32 | |
| AlMg4,5 | G34 | 3.3345.31 |
| F37 | .32 | |
| G37 | .33 | |
DIN 1790
Wire of wrought aluminum and aluminum alloys; mechanical properties
| Alphanumeric designation (Kurzzeichen) | Numeric designation (Werkstoff-nummer) |
|
| Al99,8R | W4 | 3.0385.10 |
| F7 | .26 | |
| F11 | .30 | |
| Al99,9 | W4 | 3.0305.10 |
| F7 | .26 | |
| F11 | .30 | |
| Al99,8 | W6 | 3.0285.10 |
| F9 | .26 | |
| F12 | .30 | |
| Al99,5 | W7 | 3.0255.10 |
| F10 | .26 | |
| F14 | .30 | |
| Al99 | W8 | 3.0205.10 |
| F11 | .26 | |
| F15 | .30 | |
| Al99,9Mg0,5 | W7 | 3.3308.10 |
| F10 | .26 | |
| F13 | .30 | |
| Al99,9Mg1 | W10 | 3.3318.10 |
| F13 | .26 | |
| F16 | .30 | |
| Al99,85Mg0,5 | W7 | 3.3307.10 |
| F10 | .26 | |
| F13 | .30 | |
| Al99,85Mg1 | W10 | 3.3317.10 |
| F13 | .26 | |
| F16 | .30 | |
| AlMn | W10 | 3.0515.10 |
| F13 | .26 | |
| F16 | .30 | |
| AlMg1 | W10 | 3.3315.10 |
| F14 | .26 | |
| F19 | .30 | |
| AlMg2Mn0,3 | W15 | 3.3525.10 |
| F19 | .24 | |
| F23 | .28 | |
| G22 | .29 | |
| AlMg2,5 | W17 | 3.3523.10 |
| F21 | .24 | |
| F25 | .28 | |
| G24 | .29 | |
| AlMg3 | W18 | 3.3535.10 |
| F23 | .24 | |
| F27 | .28 | |
| G26 | .29 | |
| AlMg5 | W27 | 3.3555.10 |
| F31 | .26 | |
| F35 | .30 | |
| G34 | .31 | |
| AlMgsSi0,5 | W9 | 3.3206.10 |
| F12 | .26 | |
| F15 | .41 | |
| F20 | .53 | |
| F22 | .61 | |
| F27 | .56 | |
| F30 | .73 | |
| AlMgSi1 | W11 | 3.2315.10 |
| F15 | .26 | |
| F20 | .41 | |
| F25 | .53 | |
| F28 | .61 | |
| F32 | 73 | |
| AlCu2,5Mg0,5 | F18 | 3.1305.26 |
| F27 | .41 | |
| F31 | .53 | |
| AlCuMg1 | F22 | 3.1325.26 |
| F38 | .41 | |
| F42 | .53 | |
| AlCuMg2 | F26 | 3.1355.26 |
| F42 | .41 | |
| F48 | .53 | |
| AlZn4,5Mg1 | F35 | 3.4335.61 |
| AlZnMgCu0,5 | F20 | 3.4345.26 |
| F46 | .46 | |
| AlZnMgCu1,5 | F25 | 3.4365.26 |
| F51 | .61 | |
| F55 | .73 | |
Farklı Standartlardaki Malzemeleri Anında Bulun ve Karşılaştırın!
Total Materia Horizon dünya çapında tüm standartlara göre yüz binlerce malzeme için ayrıntılı ve kesin özellik bilgileri içerir ve her ay güncellenir.
Total Materia Horizon'da ÜCRETSİZ bir test hesabı edinin ve 120'den fazla ülkeden 500.000'den fazla kullanıcıdan oluşan bir topluluğa sizde katılın.