PROPRIETARY CarTech O6 Aços de ferramenta
Atualizações de dados
Este material conta com 34 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY CarTech O6 Composição química
Carpenter Technology Corporation, Product Data Sheets,
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY CarTech O6 Propriedades físicas
Temperatura
Este material conta com 34 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY CarTech O6 Tratamento Térmico
- Prior to tempering in the range of 121-604°C (250-1200°F) for 1 hour steel were oil quenched from 802°C (1475°F).
Normalizing: Heating to 871°C (1600°F) and cooling in air.
Annealing: Heat to 766-788°C (1410-1450°F) and hold to equalize the temperature. Cool at 11°C per hour (20°F per hour) to 593°C (1100°F) and remove from the furnace. Precautions should be taken to minimize decarburization.
Hardening: Preheat at 649-677°C (1200-1250°F), then heat to 788-816°C (1450-1500°F) until it uniformly matches the color of the thermocouple in the furnace. Soak an additional 5 minutes per 25.4 mm of thickness and then quench in oil. Use the lower part of the hardening range for smaller sections and the higher temperatures for larger sections. The use of a controlled-atmosphere furnace or pack hardening to protect the surface from decarburization is required.
PROPRIETARY CarTech O6 Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- 2Referências Cruzadas
- 5Composição
- 15Propriedades Mecânicas
- 10Propriedades físicas
- 1Tratamento térmico
- -Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- -Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- 1Total de Fornecedores