PROPRIETARY Uddeholm Sverker 21 Aços inoxidáveis
Atualizações de dados
Este material conta com 223 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Uddeholm Sverker 21 Composição química
Uddeholms AB, Product Data Sheets,
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Uddeholm Sverker 21 Propriedades físicas
Temperatura
Este material conta com 223 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Uddeholm Sverker 21 Tratamento Térmico
- Soft annealing: heat through to 850°C (1560°F). Then cool in the furnace at 11°C (20°F) per hour to 650°C (1200°F), then freely in air.
Stress-relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hours. Cool slowly to 500°C (930°F), then freely in air;
Stress-relieving: After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hours. Cool slowly to 500°C (930°F), then freely in air;
Hardening: Preheating temperature: 650-750°C (1110-1380°F). Austenitizing temperature: 990-1080°C (1810–1975°F) but usually 1000-1040°C (1830-1905°F). Protect the part against decarburization and oxidation during hardening.
Quenching media: Oil (Only very simple geometries), Vacuum (high speed gas), Forced air/gas, Martempering bath or fluidized bed at 180-500°C (360-930°F), then cooling in air. (Temper the tool as soon as its temperature reaches 50-70°C (120–160°F).
Tempering: Choose the tempering temperature according to the hardness. Temper twice with intermediate cooling to room temperature. Lowest tempering temperature 180°C (360°F). Holding time at temperature minimum 2 hours.Immediately after quenching the piece should be sub-zero treated to between -70 and -80°C (-95 to -110°F), soaking time 3-4 hours followed by tempering. Sub-zero treatment will give a hardness increase of 1-3 HRC. Avoid intricate shapes as there will be risk of cracking.
Aging occurs at 110–140°C during 25-100 hours.
Nitriding: at 525°C (975°F) for 20 h and depth of case approx. 0.25 mm or 30 h and depth of case 0.30 mm or 60 h and depth of case 0.35 mm.
Nitrocarburizing: at 570°C (1060°F) for 2 h and depth of case 0.10 - 0.20 mm.
PROPRIETARY Uddeholm Sverker 21 Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
PROPRIETARY Uddeholm Sverker 21 Materiais Equivalentes Internacionais
Exibindo 15 de 97 resultados.
As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas, sempre verifique a adequação do material em relação à especificação aplicável à sua aplicação.
Precisa da lista completa do 97 de equivalentes internacionais?
Veja todos as classes 97 equivalentes com mapeamento detalhado por norma, fabricante e categoria de equivalência.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- 97Referências Cruzadas
- 6Composição
- 9Propriedades Mecânicas
- 15Propriedades físicas
- 1Tratamento térmico
- 1Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- 1Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- 93Total de Fornecedores