ABS AB/4 Aços-liga fundidos
Atualizações de dados
Este material conta com 455 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
ABS AB/4 Composição química
Rules for Materials and Welding, Part 2; Chapter 3 Section 7; Materials for Machinery, Boilers, Pressure Vessels, and Piping; Steel Machinery Forgings, American Bureau of Shipping, 2021
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
ABS AB/4 Propriedades físicas
Temperatura
Este material conta com 455 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
ABS AB/4 Tratamento Térmico
- Castings are to be either fully annealed, normalized or normalized and tempered in a furnace of sample proportions to bring the whole casting to uniform temperature above the transformation range on the annealing or normalizing cycle. The furnaces are to be maintained and have adequate means for control and recording temperature. Castings are to be held soaking at the proper temperature for at least a length of time equivalent to 1 h/25.5 mm of thickness of the heaviest member.
No annealed casting is to be removed from the furnace until the temperature of the entire furnace charge has fallen to or below a temperature of 455°C (850°F). A sufficient number of thermocouples are to be connected to the furnace charge to measure and record that its temperature is adequately uniform, unless the temperature uniformity of the furnace can be verified at regular intervals.
Tempering is to be carried out at a temperature of not less than 550°C (1022°F). - Forgings are to be normalized and tempered or double normalized and tempered.
Cooling prior to heat treatment: After forging and before reheating for heat treatment, the forgings are allowed to cool in a manner to prevent injury and to accomplish transformation.
Normalizing: The forgings are to be reheated to and held at the proper temperature above the transformation range for a sufficient time to effect the desired transformation and then withdrawn from the furnace and allowed to cool in air. Water sprays and air blasts may be specially approved for use to achieve more rapid cooling. The faster cooling rates are to be agreed to by the purchaser.
Tempering: The forgings are to be reheated to and held at the proper temperature, which will be below the transformation range, and are then to be cooled under suitable conditions to 315°C (600°F) or lower. The tempering temperature is not to be less than 550°C (1022°F).
Retreatment: The manufacturer may re-heat treat the forging, but not more than three additional times.
ABS AB/4 Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
ABS AB/4 Materiais equivalentes internacionais
Mostrando 15 de 221 resultados.
As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas — verifique sempre a adequação de acordo com a especificação aplicável à sua aplicação.
Precisa da lista completa de 221 equivalentes internacionais?
Veja todas as 221 classes equivalentes com mapeamento detalhado por norma, produtor e categoria de equivalência.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- 221Referências Cruzadas
- 10Composição
- 13Propriedades Mecânicas
- 3Propriedades físicas
- 2Tratamento térmico
- -Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- -Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- 206Total de Fornecedores