|
reference
|
1 |
chevron_right |
|
Acrylonitrile-butadiene-styrene plastic (ABS) and Fused Deposition Modeling (FDM)
|
1 |
chevron_right |
|
Ag-Cu alloy
|
1 |
chevron_right |
|
Aircraft structural metal
|
5 |
chevron_right |
|
Alloy tool steel
|
5 |
chevron_right |
|
Alloy tool steel and Laser Powder Bed Fusion (L-PBF)
|
1 |
chevron_right |
|
Alloy tool steel and Selective laser Melting (SLM)
|
1 |
chevron_right |
|
Aluminium Alloy and Electron Beam Melting (EBM)/Anisotropic high cycle fatigue property of Sc and Zr-modified Al-Mg alloy fabricated by laser powder bed fusion
|
1 |
chevron_right |
|
Aluminium Alloy and Laser Powder Bed Fusion (PBF-LB)/Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing
|
1 |
chevron_right |
|
Aluminum alloy
|
24 |
chevron_right |
|
Aluminum Alloy and Direct Metal Laser Sintering (DMLS)/Effect of direct metal laser sintering build parameters on defects and ultrasonic fatigue performance of additively manufactured AlSi10Mg
|
1 |
chevron_right |
|
Aluminum Alloy and Direct Metal Laser Sintering (DMLS)/Investigation on fatigue strength of sand-blasted DMLS-AlSi 10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Direct Metal Laser Sintering (DMLS)/Very high cycle fatigue characterization of additively manufactured AlSi10Mg and AlSi7Mg aluminium alloys based on ultrasonic fatigue testing
|
2 |
chevron_right |
|
Aluminum Alloy and Directed Energy Deposition (DED)
|
2 |
chevron_right |
|
Aluminum Alloy and Friction Stir Additive Manufacturing (FSAM)
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/A benchmark activity on the fatigue life assessment of AlSi10Mg components manufactured by L-PBF
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/A comparative investigation on the microstructure and mechanical properties of additively manufactured aluminum alloys
|
3 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Defect-induced cracking and fine granular characteristics in very-high-cycle fatigue of laser powder bed fusion AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue failure mechanisms for AlSi10Mg manufactured by L-PBF under axial and torsional loads: The role of defects and residual stresses
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue Lifetime Analysis of a Bicycle Frame Made by Additive Manufacturing Technology from AlSi10Mg
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Notch Sensitivity of AlSi10Mg Aluminum Alloy Produced by Laser Powder Bed Fusion Process
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/On the processability and mechanical behavior of Al-Mg-Sc alloy for PBF-LB
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Structural integrity of additively manufactured aluminum alloys: Effects of build orientation on microstructure, porosity, and fatigue behavior
|
5 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/The potency of defects on fatigue of additively manufactured metals
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/The Static and Fatigue Behavior of AlSiMg Alloy Plain, Notched, and Diamond Lattice Specimens Fabricated by Laser Powder Bed Fusion
|
1 |
chevron_right |
|
Aluminum Alloy and Laser Powder Bed Fusion (L-PBF)/Very-high-cycle fatigue induced growth and amorphization of Si particles in additively manufactured AlSi10Mg alloy: Dependence of applied stress ratio
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)
|
9 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Comparison of Microstructure and Mechanical Properties of Scalmalloy (R) Produced by Selective Laser Melting and Laser Metal Deposition
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Effect of microstructure, residual stresses and building orientation on the fatigue response up to 10(9) cycles of an SLM AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Effect of Shot and Laser Peening on Fatigue Strength of Additively Manufactured Aluminum Alloy with Rough Surfaces
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Fatigue Life Improvement of 3D-Printed Aluminum by Electroplating with Nickel
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0?, 15?, 45? and 90? building directions
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Fatigue strength assessment of “as built” AlSi10Mg manufactured
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/High-cycle-fatigue properties of selective-laser-melted AlSi10Mg with multiple building directions
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Influence of heat treatment on the high-cycle fatigue properties and fatigue damage mechanism of selective laser melted AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/On mechanical properties of SLM Al-Si alloy: Role of heat treatment-induced evolution of silicon morphology
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/The Effect of Stress Relief on the Mechanical and Fatigue Properties of Additively Manufactured AlSi10Mg Parts
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Melting (SLM)/VHCF Response up to 10(9) Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction
|
1 |
chevron_right |
|
Aluminum Alloy and Selective Laser Sintering (SLS)/Effect of Pre-corrosion on the Fatigue Failure of Additive Manufactured AlSi10Mg Alloy
|
1 |
chevron_right |
|
Aluminum bronze alloy
|
1 |
chevron_right |
|
Austenitic Manganese Steel
|
1 |
chevron_right |
|
Brass 60:40
|
1 |
chevron_right |
|
Brąz cynowy
|
1 |
chevron_right |
|
Brązowy
|
6 |
chevron_right |
|
Bronze casting
|
1 |
chevron_right |
|
Carburized steel
|
1 |
chevron_right |
|
Cast Iron
|
6 |
chevron_right |
|
Cast iron - flake graphite alloy
|
10 |
chevron_right |
|
Cast iron - spheroidal (ductile) graphite alloy
|
15 |
chevron_right |
|
Chromium-Molybdenum steel
|
3 |
chevron_right |
|
Cobalt alloy
|
1 |
chevron_right |
|
Cobalt Alloy and Selective Laser Melting (SLM)
|
1 |
chevron_right |
|
Cobalt based superalloy
|
1 |
chevron_right |
|
Cold work die mould steel
|
1 |
chevron_right |
|
Commercially pure titanium and Additive Manufacturing
|
1 |
chevron_right |
|
Commercially Pure Titanium and Additive Manufacturing/Microstructures and Mechanical Properties of Laser-Sintered Commercially Pure Ti and Ti-6Al-4V Alloy for Dental Applications
|
1 |
chevron_right |
|
Compacted (Vermicular) Graphite Iron Castings
|
6 |
chevron_right |
|
Complex Phase (CP) steel
|
6 |
chevron_right |
|
Composite powder - copper matrix reinforced with Al2O3 particle
|
1 |
chevron_right |
|
Copper alloy - casting
|
1 |
chevron_right |
|
Copper Alloy and Electron Beam Melting (EBM)
|
1 |
chevron_right |
|
Copper Alloy and Selective Laser Melting (SLM)
|
1 |
chevron_right |
|
Copper Alloy and Wire Arc Additive Manufacturing (WAAM)/A probabilistic approach for high cycle fatigue of Wire and Arc Additive Manufactured parts taking into account process-induced pores
|
1 |
chevron_right |
|
Copper nickel alloy (Cu-Ni)
|
1 |
chevron_right |
|
Creep-resistant austenitic cast steel
|
2 |
chevron_right |
|
Deep Drawing Steel Quality (DDS)
|
1 |
chevron_right |
|
Diecasting magnesium alloy
|
1 |
chevron_right |
|
Ductile iron
|
2 |
chevron_right |
|
Ferritic-Bainitic (FB) Steel
|
2 |
chevron_right |
|
Filler Metals
|
3 |
chevron_right |
|
Graphene nanoplatelet (ZNP) filled fluoroelastomer (FKM)
|
10 |
chevron_right |
|
Graphene nanoplatelet (ZNP) filled polyamide 6 and styrene ethylene/butylene styrene block copolymer blend (PA6+TPS-SEBS)
|
1 |
chevron_right |
|
Graphene nanoplatelet (ZNP) filled polyetheretherketone (PEEK)
|
10 |
chevron_right |
|
Graphene nanoplatelet (ZNP) filled polypropylene (PP)
|
10 |
chevron_right |
|
High Chromium (9-12% Cr) steel
|
4 |
chevron_right |
|
High Chromium cast irons
|
3 |
chevron_right |
|
High manganese steel
|
3 |
chevron_right |
|
High nitrogen austenitic stainless steel
|
1 |
chevron_right |
|
High silicon dual phase austempered ductile iron
|
1 |
chevron_right |
|
High strength low alloy (HSLA) steels
|
19 |
chevron_right |
|
High Strength Steel (HSS)
|
14 |
chevron_right |
|
High temperature gear materials
|
2 |
chevron_right |
|
High Temperature Mechanical Properties of Engine Valve Steel
|
1 |
chevron_right |
|
High temperature nickel-base superalloy
|
4 |
chevron_right |
|
High temperature structural steel
|
1 |
chevron_right |
|
High-strength multiphase steel
|
4 |
chevron_right |
|
High-temperature high-strength nickel base alloy
|
11 |
chevron_right |
|
Hot-work die steel
|
1 |
chevron_right |
|
Hybrid powder steel
|
1 |
chevron_right |
|
Iron-chromium steel
|
8 |
chevron_right |
|
Iron-Nickel alloy
|
5 |
chevron_right |
|
Komercyjnie czysty tytan
|
2 |
chevron_right |
|
Lead alloy
|
1 |
chevron_right |
|
Lead free solder
|
1 |
chevron_right |
|
Low-carbon bainitic steel
|
1 |
chevron_right |
|
Magnesium Alloys Containing Rare Earth Metals
|
4 |
chevron_right |
|
Magnesium-aluminum based alloys containing strontium (Mg-Al-Sr)
|
2 |
chevron_right |
|
Magnesium-lithium alloy
|
4 |
chevron_right |
|
Manganese-Chromium steel
|
1 |
chevron_right |
|
Materiały lotnicze
|
409 |
chevron_right |
|
Microalloyed steel
|
2 |
chevron_right |
|
MIM alloy steel
|
2 |
chevron_right |
|
Montana State University
Montana State University (SNL/MSU/DOE Composite Material Database - Mechanical Properties of Composite Materials for Wind Turbine Blades)
|
117 |
chevron_right |
|
Mosiądz
|
7 |
chevron_right |
|
Nadstopy
|
21 |
chevron_right |
|
Nanostructured bainitic steel - Nanobain
|
3 |
chevron_right |
|
Ni-Based Alloy for A-USC Boiler Pipes and Tubes
|
2 |
chevron_right |
|
Nickel Alloy and Direct Energy Deposition (DED)/Effect of laser power on porosity and mechanical properties of GH4169 fabricated by laser melting deposition
|
1 |
chevron_right |
|
Nickel Alloy and Electron Beam Melting (EBM)/Influence of defects and as-built surface roughness on fatigue properties of alloy 718
|
1 |
chevron_right |
|
Nickel alloy and Electron Beam Melting (EBM)/In-situ observation of microstructurally small fatigue crack initiation and growth behaviors
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)
|
3 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/A comparison of Inconel 718 obtained with three L-PBF production systems in terms of process parameters, as-built surface quality, and fatigue performance
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Additively manufactured IN718 in thin wall and narrow flow channel geometries
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Artificial porosity introduced during L-PBF of IN718, and its effect on fatigue performance before and after HIP
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Effect of microstructure induced anisotropy on fatigue behaviour of functionally graded Inconel 718 fabricated by additive manufacturing
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Effect of Powder Recycling on Environment-Assisted Fracture of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Effects of post-processing route on fatigue performance of laser powder bed fusion Inconel 718
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue life prediction of additively manufactured material
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Improvement of fatigue performance of laser powder bed fusion fabricated superalloys via shot peening
|
2 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Influence of high initial porosity introduced by laser powder bed fusion on the fatigue strength of Inconel 718 after post-processing with hot isostatic pressing
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Influence of post-processing on very high cycle fatigue resistance of IN718
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Influence of surface conditions and specimen orientation on high cycle fatigue properties
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/On the Microstructure of Laser Beam Powder Bed Fusion Alloy 718 and Its Influence on the Low Cycle Fatigue Behaviour
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion
|
1 |
chevron_right |
|
Nickel Alloy and Laser Powder Bed Fusion (L-PBF)/The microstructure and fatigue performance of Inconel 718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/A damage evolution model based on micro-structural characteristics for additive manufactured superalloy under monotonic and cyclic loading conditions
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Anisotropic cyclic plasticity modeling for additively manufactured nickel-based superalloys
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Assessment of mechanical properties and fatigue performance of SLM IN718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Effect of scanning strategy on mechanical properties of selective laser melted Inconel 718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Effects of hydrogen and load frequency on the fatigue crack propagation behavior of selective laser melted Inconel 718 alloy
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Effects of sandblasting and HIP on very high cycle fatigue performance
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Heat treatment for selective laser melting of Inconel 718 alloy
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Influence of defects and as-built surface roughness on fatigue properties of alloy 718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Influence of heat treatment on the fatigue resistance of Inconel 718 fabricated by selective laser melting (SLM)
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/In-situ observation of microstructurally small fatigue crack initiation and growth behaviors
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Long fatigue crack growth in Inconel 718 produced by selective laser melting
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Microstructure and directional fatigue behavior of Inconel 718 produced by SLM
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Mitigation of anisotropic fatigue in nickel alloy 718 manufactured via selective laser melting
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Multiscale analysis of interior cracking behavior of Ni-based superalloy fabricated by SLM under very-high-cycle-fatigue at high-temperature
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Notched fatigue testing of Inconel 718 prepared by selective laser melting
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/On the fatigue crack growth behaviour of selective laser melting fabricated Inconel 625: Effects of build orientation and stress ratio
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Pore-affected fatigue life scattering and prediction of AM IN718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/SLM process parameters effects on the fatigue strength of AMed Inconel 718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Smooth and notch fatigue behavior of SLM Inconel 718
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Subsurface faceted cracking behavior of selective laser melting Ni-based superalloy under very high cycle fatigue
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/The high-cycle fatigue properties of SLM IN718 at RT and ET
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Toward qualification of additively manufactured metal parts
|
1 |
chevron_right |
|
Nickel alloy and Selective Laser Melting (SLM)/Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by SLM at Elevated Temperature
|
1 |
chevron_right |
|
Nickel alloy and Wire-fed Electron Beam Additive Manufacturing (EBAM)/In-situ observation of microstructurally small fatigue crack initiation and growth behaviors
|
1 |
chevron_right |
|
Nickel alloy steel
|
8 |
chevron_right |
|
Nickel silver, 55-18
|
1 |
chevron_right |
|
Nickel-chromium steel
|
1 |
chevron_right |
|
Niskokosztowy nadstop drugiej generacji z monokryształem (SC).
|
1 |
chevron_right |
|
Ni-Ti alloy
|
1 |
chevron_right |
|
Nonburning titanium alloy
|
1 |
chevron_right |
|
Pb-free solder alloy
|
1 |
chevron_right |
|
Platyna
|
1 |
chevron_right |
|
PM steel that contain manganese
|
2 |
chevron_right |
|
Powder metallurgy (P/M) steel
|
1 |
chevron_right |
|
Progressive material for automotive Industry
|
1 |
chevron_right |
|
Quenched steel
|
1 |
chevron_right |
|
Sintered alloy
|
2 |
chevron_right |
|
Stainless Steel and Binder Jet Printing (BJP)
|
1 |
chevron_right |
|
Stainless Steel and Direct Metal Laser Sintering (DMLS)
|
2 |
chevron_right |
|
Stainless Steel and Direct Metal Laser Sintering (DMLS)/Fatigue performance of hybrid steel samples with laser sintered implants
|
1 |
chevron_right |
|
Stainless Steel and Direct Metal Laser Sintering (DMLS)/Ultra Low-Cycle Fatigue Behavior Comparison between AM and Rolled 17-4 PH
|
1 |
chevron_right |
|
Stainless Steel and Electron Beam Melting (EBM)
|
1 |
chevron_right |
|
Stainless Steel and Laser Deposition Welded(LDW)/Determination of the anisotropic fatigue behaviour of additively manufactured structures with short-time procedure PhyBaL(LIT)
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)
|
3 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure-property relationships
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Correlation between microstructure and cyclic behavior of 316L stainless steel obtained by Laser Powder Bed Fusion
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Cyclic plastic material behavior of 316L manufactured by laser powder bed fusion (PBF-LB_M)
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Effect of residual stress on fatigue strength of 316L stainless steel produced by L-PBF
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Effects of channel contour laser strategies on fatigue properties and residual stresses of PBF-LB
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Effects of crack orientation and heat treatment on fatigue-crackgrowth behavior of AM 17-4 PH
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Effects of manufacturing parameters and mechanical post-processing on stainless steel 316L processed by laser powder bed fusion
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Enhancing ductility and fatigue strength of additively manufactured metallic materials by preheating the build platform
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Experimental investigation on the fatigue behavior of laser powder bed fused 316L stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Extreme variation in fatigue
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue behavior and modeling for additive manufactured 304L stainless steel: The effect of surface roughness
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue behavior of additively manufactured 17-4 PH stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue crack growth behavior of additively manufactured 17-4 PH
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue Cracking of Additively Manufactured Materials-Process and Material Perspectives
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue strength and life assessment of L-PBF 316L stainless steel showing process and corrosion related defects
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue strength of PBF-LB_M and wrought 316L stainless steel: effect of post-treatment and cyclic mean stress
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Fatigue-life prediction of additively manufactured material
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/High cycle fatigue and ratcheting interaction of laser powder bed fusion stainless steel 316L: Fracture behaviour and stress-based modelling
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/High cycle fatigue behavior and life prediction for 17-4 PH
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/High cycle fatigue life prediction of laser additive manufactured stainless steel: A machine learning approach
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Impact of single structural voids on fatigue properties of AISI 316L manufactured by laser powder bed fusion
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Improving the Defect Tolerance of PBF-LB/M Processed 316L Steel by Increasing the Nitrogen Content
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Low cycle fatigue of additively manufactured thin-walled stainless steel 316L
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Microstructural analysis and fatigue crack initiation modelling of additively manufactured 316L after different heat treatments
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Microstructure and fatigue behavior of laser-powder bed fusion austenitic stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Multiaxial fatigue of LB-PBF additive manufactured 17-4 PH stainless steel including the effects of surface roughness and HIP treatment
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Observations on the influence of process and corrosion related defects on the fatigue strength of 316L stainless steel manufactured by Laser Powder Bed Fusion (L-PBF)
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/On the factors influencing the elastoplastic cyclic response and low cycle fatigue failure of AISI 316L steel produced by laser-powder bed fusion
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Predicting fatigue life of metal LPBF components by combining a large fatigue database for different sample conditions with novel simulation strategies
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/The Effect of Severe Shot Peening on Fatigue Life of Laser Powder Bed Fusion Manufactured 316L Stainless Steel
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Variation of fatigue strength of parts manufactured by laser powder bed fusion
|
1 |
chevron_right |
|
Stainless Steel and Laser Powder Bed Fusion (L-PBF)/Very High Cycle Fatigue Behavior of Additively Manufactured 316L Stainless Steel
|
1 |
chevron_right |
|
Stainless Steel and Metal Injection Molding (MIM)/On the Microstructures and Fatigue Behaviors of 316L Stainless Steel Metal Injection Molded with Gas- and Water-Atomized Powders
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Crack Growth Behavior of Additively Manufactured 316L Steel-Influence of Build Orientation and Heat Treatment
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Deformation mechanisms of selective laser melted 316L austenitic stainless steel in high temperature low cycle fatigue
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Determination of the anisotropic fatigue behaviour of additively manufactured structures with short-time procedure PhyBaL(LIT)
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short-time procedures
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Effect of High Porosity on Bending Fatigue Properties of 3D Printed AISI 316L Steel
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Effect of micro-defects on fatigue lifetime of additive manufactured 316L stainless steel under multiaxial loading
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Effects of building orientation and heat treatment on fatigue behavior
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue behaviour of maraging steel samples produced by SLM under constant and variable amplitude loading
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue behaviour of selective laser melting steel components
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue performance of additive manufactured metallic parts
|
2 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue strength estimation methodology
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Fatigue strength of additively manufactured 316L austenitic stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/High and low‑cycle‑fatigue properties of 17-4 PH
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Influences of Horizontal and Vertical Build Orientations and Post-Fabrication Processes on the Fatigue Behavior of Stainless Steel 316L Produced by Selective Laser Melting
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Investigation of the anisotropic fatigue behavior of additively manufactured structures made of AISI 316L with short-time procedures PhyBaL(LIT )and PhyBaL(CHT)
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Mechanical behavior of selective laser melted 316L stainless steel
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Scale and Shape Effects on the Fatigue Behaviour of Additively Manufactured SS316L Structures: A Preliminary Study
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing
|
1 |
chevron_right |
|
Stainless Steel and Selective Laser Melting (SLM)/Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting
|
1 |
chevron_right |
|
Stal dwufazowa (DP).
|
25 |
chevron_right |
|
Stal ekstragłębokotłoczna (EDDS)
|
1 |
chevron_right |
|
Stal handlowa (CS)
|
1 |
chevron_right |
|
Stal konstrukcyjna
|
1 |
chevron_right |
|
Stal manganowa
|
1 |
chevron_right |
|
Stal maraging
|
5 |
chevron_right |
|
Stal martenzytyczna
|
8 |
chevron_right |
|
Stal mikrostopowa
|
6 |
chevron_right |
|
Stal na formy do tworzyw sztucznych
|
1 |
chevron_right |
|
Stal narzędziowa
|
3 |
chevron_right |
|
Stal nierdzewna
|
7 |
chevron_right |
|
Stal nierdzewna austenityczna
|
11 |
chevron_right |
|
Stal niklowa
|
1 |
chevron_right |
|
Stal niskowęglowa
|
3 |
chevron_right |
|
Stal stopowa konstrukcyjna
|
14 |
chevron_right |
|
Stal szybkotnąca
|
2 |
chevron_right |
|
Stal typu IF głęboko tłoczona do przemysłu motoryzacyjnego
|
1 |
chevron_right |
|
Stal żaroodporna
|
1 |
chevron_right |
|
Stale maraging niklowe
|
3 |
chevron_right |
|
Stale umacniane wydzieleniowo (BH)
|
9 |
chevron_right |
|
Stali Duplex
|
5 |
chevron_right |
|
Steel and Selective Laser Melting (SLM)
|
1 |
chevron_right |
|
Steel for pipelines
|
1 |
chevron_right |
|
Stop magnezu
|
27 |
chevron_right |
|
Stop miedzi
|
23 |
chevron_right |
|
Stop niklu
|
12 |
chevron_right |
|
Stop odlewniczy
|
2 |
chevron_right |
|
Stop tytanu
|
29 |
chevron_right |
|
Super heat-resistant nickel alloys
|
2 |
chevron_right |
|
Titanium Alloy and Direct Energy Deposition (DED)/Corrosion fatigue of Ti-6Al-4V coupons manufactured by directed energy deposition
|
1 |
chevron_right |
|
Titanium Alloy and Direct Energy Deposition (DED)/High-cycle fatigue crack initiation and propagation in laser melting deposited TC18 titanium alloy
|
1 |
chevron_right |
|
Titanium Alloy and Direct Energy Deposition (DED)/The effect of porosity defects on the mid-cycle fatigue behavior of directed energy deposited Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Direct Laser Deposition (DLD)/Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Direct Laser Forming (DLF)/Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming
|
1 |
chevron_right |
|
Titanium Alloy and Direct Metal Laser Sintering (DMLS)
|
1 |
chevron_right |
|
Titanium Alloy and Direct Metal Laser Sintering (DMLS)/Microstructures and Mechanical Properties of Laser-Sintered Commercially Pure Ti and Ti-6Al-4V Alloy for Dental Applications
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)
|
5 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Comparison of the High Cycle Fatigue Behavior of Ti-6Al-4V Produced Respectively by EBM and Hot-Rolling
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Effect of Post Processes on Mechanical Properties of 3D Printed Ti6Al4V Gears
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Effects of laser shock peening on microstructure and fatigue behavior of Ti-6Al-4V alloy fabricated via electron beam melting
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Fatigue life evaluation of Ti-6Al-4V welded joints manufactured by electron beam melting
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Fatigue properties of a titanium alloy (Ti-6Al-4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Mapping the Tray of Electron Beam Melting of Ti-6Al-4V: Properties and Microstructure
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Microstructure and Mechanical Properties of Ti-6Al-4V Additively Manufactured by Electron Beam Melting with 3D Part Nesting and Powder Reuse Influences
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Microstructure, Anisotropic Mechanical Properties and Very High Cycle Fatigue Behavior of Ti6Al4V Produced by Selective Electron Beam Melting
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/Surface globularization generated by standard PBF-EB Ti-6Al-4V processing achieves an improvement in fatigue performance
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/The effects of surface finish on the fatigue performance of electron beam melted Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Electron Beam Melting (EBM)/The influence of finish machining depth and hot isostatic pressing on defect distribution and fatigue behaviour of selective electron beam melted Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and High-Power Laser Metal Deposition (HP-LMD)/The anisotropy of high cycle fatigue property and fatigue crack growth behavior of Ti-6Al-4V alloy fabricated by high-power laser metal deposition
|
1 |
chevron_right |
|
Titanium Alloy and Laser Engineered Net Shaping (LENS)/Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping
|
1 |
chevron_right |
|
Titanium Alloy and Laser Metal Deposition (LMD)
|
2 |
chevron_right |
|
Titanium Alloy and Laser Metal Deposition (LMD)/Influence of deposition strategy on the microstructure and fatigue properties of laser metal deposited Ti-6Al-4V powder on Ti-6Al-4V substrate
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Additively manufactured Ti-6Al-4V thin struts via laser powder bed fusion: Effect of building orientation on geometrical accuracy and mechanical properties
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Effect of heat treatment temperature and turning residual stresses on the plain and notch fatigue strength of Ti-6Al-4V additively manufactured via laser powder bed fusion
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Experimental study on mechanical properties of laser powder bed fused Ti-6Al-4V alloy under post-heat treatment
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue crack growth in Ti-6Al-4V specimens produced by Laser Powder Bed Fusion and submitted to Hot Isostatic Pressing
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue life estimation of additively manufactured Ti-6Al-4V: Sensitivity, scatter and defect description in Damage-tolerant models
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Fatigue performance of laser powder bed fusion hydride-dehydride Ti-6Al-4V powder
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/High cycle fatigue performance evaluation of a laser powder bed fusion manufactured Ti-6Al-4V bracket for aero-engine applications
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Influence of Post-Processing Conditions on the Microstructure, Static, and Fatigue Resistance of Laser Powder Bed Fused Ti-6Al-4V Components
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Influence of Powder Particle Morphology on the Static and Fatigue Properties of Laser Powder Bed-Fused Ti-6Al-4V Components
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/On the role of building orientation and surface post-processes on the fatigue life of Ti-6Al-4V coupons manufactured by laser powder bed fusion
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/The Influence of Dimensions and Powder Recycling on the Roughness and Mechanical Properties of Ti-6Al-4V Parts Fabricated by Laser Powder Bed Fusion
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/The influence of oxygen on the chemical composition and mechanical properties of Ti-6Al-4V during laser powder bed fusion (L-PBF)
|
1 |
chevron_right |
|
Titanium Alloy and Laser Powder Bed Fusion (L-PBF)/The role of microstructural evolution on the fatigue behavior of additively manufactured Ti-6Al-4V alloy
|
1 |
chevron_right |
|
Titanium Alloy and Laser Solid Forming (LSF)/Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition: Experimental and prediction
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)
|
2 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to very-high-cycle regime
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Crack initiation mechanisms under two stress ratios up to very-high-cycle fatigue regime for a selective laser melted Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Defect induced cracking and modeling of fatigue strength for an additively manufactured Ti-6Al-4V alloy in very high cycle fatigue regime
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Effect of energy density on quasi-static and dynamic mechanical properties of Ti-6Al-4V alloy additive-manufactured by selective laser melting
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Effect of HIP post-processing at 850 degrees C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue Assessment of Selective Laser Melted Ti-6Al-4V: Influence of Speed Manufacturing and Porosity
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue behaviour of additively manufactured Ti-6Al-4V alloy: The role of defects on scatter and statistical size effect
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue Failure from Inner Surfaces of Additive Manufactured Ti-6Al-4V Components
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue performance evaluation of selective laser melted Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue performances of selective laser melted Ti-6Al-4V alloy: Influence of surface finishing, hot isostatic pressing and heat treatments
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Fatigue properties of selective laser melted Ti-6Al-4V alloy subjected to laser shock processing
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Influence of small particles inclusion on selective laser melting of Ti-6Al-4V powder
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Microstructure and tensile properties of Ti-6Al-4V alloys manufactured by selective laser melting with optimized processing parameters
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/On the effect of internal channels and surface roughness on the high-cycle fatigue performance of Ti-6Al-4V processed by SLM
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Prediction of anisotropic LCF behavior for SLM Ti-6Al-4V considering the spatial orientation of defects
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures
|
1 |
chevron_right |
|
Titanium Alloy and Selective Laser Melting (SLM)/The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting
|
1 |
chevron_right |
|
Titanium Alloy and Wire Arc Additive Manufacturing (WAAM)/Criticality of porosity defects on the fatigue performance of wire plus arc additive manufactured titanium alloy
|
1 |
chevron_right |
|
Titanium Alloy and Wire Arc Additive Manufacturing (WAAM)/Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium Alloy and Wire Arc Additive Manufacturing (WAAM)/Influence of deposition strategies on tensile and fatigue properties in a wire plus arc additive manufactured Ti-6Al-4V
|
1 |
chevron_right |
|
Titanium nickelide
|
1 |
chevron_right |
|
Tool Steel and Direct Metal Laser Sintering (DMLS)/Fatigue Response of As-Built DMLS Maraging Steel and Effects of Aging, Machining, and Peening Treatments
|
1 |
chevron_right |
|
Tool Steel and Direct Metal Laser Sintering (DMLS)/Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine
|
1 |
chevron_right |
|
Tool Steel and Direct Metal Laser Sintering (DMLS)/Sensitivity of direct metal laser sintering Maraging steel fatigue strength to build orientation and allowance for machining
|
1 |
chevron_right |
|
Tool Steel and Laser Powder Bed Fusion (L-PBF)/Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by Laser Powder Bed Fusion
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Influence of defects on axial fatigue strength of maraging steel specimens produced by additive manufacturing EOSINT M280
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Influence of defects on axial fatigue strength of maraging steel specimens produced by additive manufacturing MYSINT 100
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Low-Cycle Fatigue Behaviour of AISI 18Ni300 Maraging Steel Produced by Selective Laser Melting
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Multiaxial fatigue behaviour of maraging steel produced by selective laser melting
|
1 |
chevron_right |
|
Tool Steel and Selective Laser Melting (SLM)/Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
|
1 |
chevron_right |
|
TRIP - Transformation Induced Plasticity Steel
|
19 |
chevron_right |
|
Twinning Induced Plasticity (TWIP) Steels
|
5 |
chevron_right |
|
TWIP / TRIP Steel
|
1 |
chevron_right |
|
Ultra High Strength Steel (UHSS)
|
4 |
chevron_right |
|
Unalloyed quality steels
|
1 |
chevron_right |
|
Wear-Resistant, Iron-Based Hard-Facing Alloys
|
11 |
chevron_right |
|
White cast iron
|
5 |
chevron_right |
|
Zinc alloy
|
2 |
chevron_right |
|
Zinc aluminum alloy
|
1 |
chevron_right |
|
Zinc-aluminium (ZA) alloys
|
1 |
chevron_right |
|
Zirconium base bulk metallic glass (BMG) alloy
|
1 |
chevron_right |
|
Zn-Cu-Ti alloy
|
1 |
chevron_right |