SAE 2461 亜鉛合金
材料グループ:
非鉄合金 / 亜鉛合金
国 / 規格:
米国 / SAE
データ更新
最新情報: 2021-05
更新の総数: 1
更新履歴
この材料には 4 件の特性データがありますが、現在表示されているのは一部のみです。
登録して、温度や条件ごとの詳細データを含む全ての材料特性データにアクセスしましょう。
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
SAE 2461 物理的性質
温度
この材料には 4 件の特性データがありますが、現在表示されているのは一部のみです。
温度や条件ごとの詳細な物理データを閲覧
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
SAE 2461 熱処理
- All steel parts having a hardness of 36 HRC and over and steel threaded fasteners 34 HRC and over that are machined, ground, cold formed or cold straightened after heat treatment shall be cleaned to remove surface contamination and thermally stress relieved before plating. Temperatures to which parts are heated shall be such that maximum stress relief is obtained while still maintaining hardness of parts within drawing limits. Unless otherwise specified, the following treatment temperatures and times shall be used:
For parts, excluding nitrided parts, having a hardness of 55 HRC and above, including carburized and induction hardened parts, stress relieve at 135°C ± 14°C (275°F ± 25°F) for 5 to 10 hours.
For parts having a hardness less than 55 HRC, and for nitrided parts, stress relieve at 191°C ± 14°C (375°F ± 25°F) for a minimum of 4 hours. Higher temperatures shall be used only when specified or approved by the cognizant engineering organization.
For Peened Parts
If stress relief temperatures above (191°C) 375°F are specified, the stress relief shall be performed prior to peening.
Hydrogen Embrittlement
The plating process after baking shall not cause hydrogen embrittlement in steel parts 36 HRC and over and threaded steel fasteners 34 HRC and over.
用途に最適な材料を選定 - デモを予約
- -相互参照
- -成分
- -機械的特性
- 3物理的特性
- 1熱処理
- -金属組織
- -被削性
- -応力-ひずみ
- -成形性
- -疲労
- -破壊
- -クリープ
- -接合
- -コーティング
- -寸法
- -トライボロジ
- -腐食
- -時効
- -耐候性
- -照射
- -総仕入先数