PROPRIETARY Böhler-Uddeholm P20 Modified 構造・建築鋼
材料グループ:
鉄合金 / 構造・建築鋼
国 / 規格:
PROPRIETARY
データ更新
最新情報: 2018-04
更新の総数: 2
更新履歴
2017-07
この材料には 21 件の特性データがありますが、現在表示されているのは一部のみです。
登録して、温度や条件ごとの詳細データを含む全ての材料特性データにアクセスしましょう。
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Böhler-Uddeholm P20 Modified 物理的性質
温度
熱容量
登録して全ての詳細データを表示
無料アクセスで全データをご利用いただけます
全ての材料データを見る
この材料には 21 件の特性データがありますが、現在表示されているのは一部のみです。
温度や条件ごとの詳細な物理データを閲覧
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Böhler-Uddeholm P20 Modified 熱処理
- It is intended for use in the hardened and tempered condition, i.e. the delivered condition. When, however, the steel is to be heat treated to a higher hardness or case hardened, the following instructions may be helpful.
Soft annealing: Protect the steel and heat through to 720°C. Then cool in the furnace at 10°C per hour to 600°C, then freely in air.
Stress relieving: After rough machining the tool should be heated through to 550°C, holding time 2 hr. Cool slowly to room temperature.
Hardening: The steel should be soft annealed before hardening. Preheating temperature: 500-600°C. Austenitizing temperature: 880°C.The steel should be heated through to the austenitizing temperature and held at temperature for 30 minutes. Protect the tool against decarburization and oxidation during the hardening process.
Quenching media: High speed gas/circulating atmosphere. (Only suitable for small dimensions); Oil (Warm oil 65-80°C); Martempering bath 300°C, max. 4 minutes, then air cool. Note: Temper immediately when tool reaches 50–70°C.
PROPRIETARY Böhler-Uddeholm P20 Modified 機械的特性
温度
降伏強度, Rp0.2
登録して全ての詳細データを表示
無料アクセスで全データをご利用いただけます
全ての材料データを見る
用途に最適な材料を選定 - デモを予約
- -相互参照
- -成分
- 7機械的特性
- 11物理的特性
- 2熱処理
- -金属組織
- -被削性
- -応力-ひずみ
- -成形性
- -疲労
- -破壊
- -クリープ
- -接合
- -コーティング
- -寸法
- -トライボロジ
- -腐食
- -時効
- -耐候性
- -照射
- 1総仕入先数