NMX B-180 Grade 7 Acciai strutturali e da costruzione
Aggiornamenti dei dati
Questo materiale dispone di 34 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
NMX B-180 Grade 7 Composizione chimica
NMX-B-180: 1991 / Tubi in acciaio senza giunzione e saldati per basse temperature
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
NMX B-180 Grade 7 Proprietà fisiche
Temperatura
Questo materiale dispone di 34 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
NMX B-180 Grade 7 Trattamento Termico
- Normalized and tempered: Heat to a uniform temperature of min. 816°C, cooled in air and subsequently reheating to a suitable tempering temperature. Only for seamless pipes, reheat and control the final temperature of process in a range of 845 C to 945°C and cooled in a controlled atmosphere furnace, followed by tempering Seamless pipe Grades 1, 6 and 10 may be heat treated by uniform heating to a temperature not less than 815°C followed by quenching in a liquid bath and subsequently reheating to a suitable tempering temperature, in rather than any of the other heat treatments described in the preceding paragraphs Quenched and tempered: Heated to a uniform temperature of 800°C ± 15°C, and maintaining this temperature for a min. of 2 minutes/in. of thickness or one hour per 25.4 mm thick (not less than 15 minutes) and quenching by immersion in circulating water. Reheat the tubes to reach a uniform temperature between 565°C and 605°C, maintaining this temperature for a time of 2 minutes /mm thick or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air or water at a rate not less than 165°C/h. Double normalized and tempered: Heated to a uniform temperature of 900°C ± 15°C, and maintain this temperature for a min. of 2 minutes/ in. of thickness, or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air. Heating again until the tubes reach a uniform temperature of 790°C ± 15°C, holding this temperature for a min. of 2 minutes/mm thick or one hour per 25.4 mm (not less than 15 minutes) and cooled in air. Finally reheated to a uniform temperature of 565°C to 605°C, and maintain this temperature for a min. of 2 minutes/mm thick, or one hour per 25.4 mm (not less than 15 minutes), and cooled in air or water at a speed not less than 165°C/h.
NMX B-180 Grade 7 Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
NMX B-180 Grade 7 Materiali equivalenti internazionali
Visualizzazione di 6 risultati su 11.
Le categorie di equivalenza riflettono il confronto tra composizione chimica e proprietà meccaniche — verificare sempre l'idoneità rispetto alla specifica applicabile alla propria applicazione.
Hai bisogno dell'elenco completo dei 11 equivalenti internazionali?
Visualizza tutti i 11 gradi equivalenti con mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 11Riferimenti incrociati
- 6Composizione
- 12Proprietà meccaniche
- 3Proprietà fisiche
- 1Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 1Fornitori Totali