ASTM A 439 Type D-2B Ghise
Aggiornamenti dei dati
Questo materiale dispone di 4383 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
ASTM A 439 Type D-2B Composizione chimica
A439/A439M: 2018 / Specifiche normalizzate per getti di ghisa austenitica duttile
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
ASTM A 439 Type D-2B Trattamento Termico
- By agreement between the manufacturer and the purchaser:
Stress relieving by heating to 620 to 650°C (1150 to 1200°F) for not less than 1h and not for more than 2h per 25 mm (1 inch) of thickness in the thickest section. Heating and cooling shall be uniform and shall not be more than 222°C/h (400°F/h) for castings less than 25 mm (1 inch) in maximum thickness and shall be not more than 222°C/h (400°F/h) divided by the maximum section thickness in 25 mm (1 inch) for thicker castings. During the cooling cycle, castings may be cooled in still air after the temperature has dropped to 310°C (600°F).
In-mold stress relieving by allowing castings to cool slowly in the mold at a rate not exceeding 222°C/h (400°F/h). Once the temperature has dropped below 310°C (600°F), castings can be removed from the mold and cooled in still air.
Stabilizing by heating at 870°C (1600°F) for a period of 1 h per 25 mm (1 inch) of section, with a minimum period of 1 h, followed by uniform cooling, preferably in still air, whenever dimensional changes in high-temperature service are a problem.
Annealing, for castings with chilled edges or excessive carbides, at 960 to 1040°C (1750 to 1900°F) for 0.5 h to 5 h followed by uniform cooling, preferably in still air.
ASTM A 439 Type D-2B Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
ASTM A 439 Type D-2B Materiali equivalenti internazionali
Visualizzazione di 7 risultati su 13.
Le categorie di equivalenza riflettono il confronto tra composizione chimica e proprietà meccaniche — verificare sempre l'idoneità rispetto alla specifica applicabile alla propria applicazione.
Hai bisogno dell'elenco completo dei 13 equivalenti internazionali?
Visualizza tutti i 13 gradi equivalenti con mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 13Riferimenti incrociati
- 6Composizione
- 4Proprietà meccaniche
- -Proprietà fisiche
- 1Trattamento Termico
- -Metallografia
- 1Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- 4351Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 7Fornitori Totali