EN E220 Acciai strutturali e da costruzione
Aggiornamenti dei dati
Questo materiale dispone di 176 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
EN E220 Composizione chimica
EN 10296-1: 2003 / Tubi circolari in acciaio saldati per impieghi meccanici e generali in campo ingegneristico - Condizioni tecniche di fornitura - Parte 1: Tubi di acciaio non legato e legato
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
EN E220 Proprietà fisiche
Temperatura
Questo materiale dispone di 176 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
EN E220 Trattamento Termico
- Welded and cold sized (+CR1) - Normally not heat treated, but suitable for final annealing. After annealing or normalizing, the resulting mechanical properties meet the requirements specified for the delivery condition +A or +N, respectively.
Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements. - Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
EN E220 Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
-
85 Riferimenti incrociati
-
17 Composizione
-
9 Proprietà meccaniche
-
3 Proprietà fisiche
-
2 Trattamento Termico
-
- Metallografia
-
- Lavorabilità
-
- Sforzo-Deformazione
-
- Formabilità
-
- Fatica
-
- Frattura
-
- Strisciare
-
- Giunzioni
-
- Rivestimenti
-
16 Dimensioni
-
- Tribologia
-
- Corrosione
-
- Invecchiamento
-
- Resistenza agli agenti atmosferici
-
- Irraggiamento
-
44 Fornitori Totali