A numeral index system is used to identify the compositions of the SAE steels, which makes it possible to use numerals that are partially descriptive of the composition of material covered by such numbers. In the case of the simple alloy steels, the second digit generally indicates the approximate percentage of the predominant alloying element.
This article contains a list of standards that covers among other things:
For more information on the SAE AMS designation system see Introduction to the SAE AMS Standard Designation System.
Standard Number |
Last version |
Description | Status |
SAE AMS 5225 | 2006 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, 1800 °F (982 °C) Solution Heat Treated | /1/ |
SAE AMS 5342 | 2006 | Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H1100), 130 ksi (896 MPa) Tensile Strength (17-4) | /1/ |
SAE AMS 5343 | 2006 | Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H1000), 150 ksi (1034 MPa) Tensile Strength (17-4) | /1/ |
SAE AMS 5344 | 2007 | Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H900), 180 ksi (1241 MPa) Tensile Strength (17-4) | /1/ |
SAE AMS 5346 | 2006 | Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu, Solution and Precipitation Heat Treated (H925), 180 ksi (1241 MPa) Tensile Strength (15-5) | /1/ |
SAE AMS 5500 | 2006 | Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded | /1/ |
SAE AMS 5501 | 2007 | Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength | /1/ |
SAE AMS 5503 | 2006 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr (SAE 51430) Annealed | /1/ |
SAE AMS 5504 | 2002 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410), Annealed | /1/ |
SAE AMS 5505 | 2001 | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 12Cr (SAE 51410 Modified), Ferrite Controlled, Annealed | /1/ |
SAE AMS 5506 | 2006 | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed | /1/ |
SAE AMS 5507 | 2006 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (SAE 30316L) Solution Heat Treated | /1/ |
SAE AMS 5508 | 2001 | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed | /1/ |
SAE AMS 5510 | 2008 | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated | /1/ |
SAE AMS 5511 | 2003 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated | /1/ |
SAE AMS 5512 | 2007 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated | /1/ |
SAE AMS 5513 | 2004 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated | /1/ |
SAE AMS 5514 | 2007 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated | /1/ |
SAE AMS 5515 | 2007 | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility | /1/ |
SAE AMS 5516 | 2007 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated | /1/ |
SAE AMS 5517 | 2006 | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength | /1/ |
SAE AMS 5518 | 2008 | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength | /1/ |
SAE AMS 5519 | 2008 | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength | /1/ |
SAE AMS 5520 | 2003 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable | /1/ |
SAE AMS 5521 | 2006 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (SAE 30310S) Solution Heat Treated | /1/ |
SAE AMS 5523 | 2006 | Steel, Corrosion and Heat Resistant, Sheet, Strip and Plate (23Cr-13.5Ni) Solution Heat Treated | /1/ |
SAE AMS 5524 | 2008 | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate (18Cr-13Ni-2.5Mo) Solution Heat Treated | /1/ |
SAE AMS 5525 | 2007 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, 1800 °F (982 °C) Solution Heat Treated | /1/ |
SAE AMS 5526 | 1989 | Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0.22Ti Solution Heat Treated | Withdrawn 2007 /1/ |
SAE AMS 5528 | 2007 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable | /1/ |
SAE AMS 5529 | 2008 | Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness | /1/ |
SAE AMS 5532 | 2006 | Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb(Nb) - 0.15N, Solution Heat Treated | /1/ |
SAE AMS 5546 | 1990 | Steel Sheet and Strip, Corrosion and Moderate Heat Resistant, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, Cold Rolled, Tempered | Withdrawn 1995 /1/ |
SAE AMS 5547 | 2006 | Steel, Corrosion and Heat-Resistant, Sheet and Strip, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N, Solution Heat Treated | /1/ |
SAE AMS 5548 | 2007 | Steel, Corrosion and Heat-Resistant, Sheet and Strip, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, 1850 to 1975 °F (1010 to 1079 °C) Annealed | /1/ |
SAE AMS 5549 | 1987 | Steel, Corrosion and Heat Resistant, Plate, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N, Solution Heat Treated | /1/ |
SAE AMS 5554 | 2006 | Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed | /1/ |
SAE AMS 5556 | 2003 | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE 30347) Solution Heat Treated | /1/ |
SAE AMS 5557 | 2007 | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated | /1/ |
SAE AMS 5558 | 2008 | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall Solution Heat Treated | /1/ |
SAE AMS 5559 | 2007 | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated | /1/ |
SAE AMS 5560 | 2009 | Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated | /1/ |
SAE AMS 5561 | 2007 | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, High-Pressure Hydraulic | /1/ |
SAE AMS 5562 | 2001 | Steel, Corrosion and Heat Resistant, Seamless Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, Solution Heat Treated | /1/ |
SAE AMS 5563 | 2002 | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1 Hard Temper | /1/ |
SAE AMS 5564 | 2000 | Steel, Corrosion Resistant, Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper | /1/ |
SAE AMS 5565 | 2001 | Steel, Corrosion Resistant, Welded Tubing 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated | /1/ |
SAE AMS 5566 | 2001 | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) High Pressure, Cold Drawn | /1/ |
SAE AMS 5567 | 2002 | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) | /1/ |
SAE AMS 5568 | 2006 | Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation-Hardenable | /1/ |
SAE AMS 5569 | 2001 | Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C max Cold Drawn, 1/8 Hard Temper | /1/ |
SAE AMS 5570 | 2006 | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (SAE 30321) Solution Heat Treated | /1/ |
SAE AMS 5571 | 2006 | Steel, Corrosion and Heat-Resistant, Seamless Tubing, 18Cr - 10.5Ni - 0.70Cb (Nb), Solution Heat Treated | /1/ |
SAE AMS 5572 | 2002 | Steel, Corrosion and Heat-Resistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated | /1/ |
SAE AMS 5573 | 2002 | Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated | /1/ |
SAE AMS 5574 | 2001 | Steel, Corrosion and Heat Resistant, Seamless Tubing 23Cr - 13.5Ni (SAE 30309S) Solution Heat Treated | /1/ |
SAE AMS 5575 | 2007 | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb(Nb) (SAE 30347) Solution Heat Treated | /1/ |
SAE AMS 5576 | 2005 | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated | /1/ |
SAE AMS 5577 | 2001 | Steel, Corrosion and Heat Resistant, Welded Tubing 25Cr - 20Ni (SAE 30310) Solution Heat Treated | /1/ |
SAE AMS 5578 | 2008 | Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted, Solution Heat Treated, Precipitation Hardenable | /1/ |
SAE AMS 5579 | 1987 | Steel, Corrosion and Heat Resistant, Tubing Welded 19.5Cr - 9.5Ni - 1.4Mo -1.4W - 0.42(Cb + Ta) - 0.22Ti Thin Wall | Withdrawn 1992 /1/ |
Total Materia è la principale piattaforma informativa sui materiali, che fornisce le più ampie informazioni sulle proprietà dei materiali metallici e non metallici e altri dati sui materiali.
Tutte queste informazioni sono disponibili in Total Materia Horizon, lo strumento di informazione e selezione dei materiali per eccellenza, che offre un accesso impareggiabile a oltre 540.000 materiali e a dati di riferimento curati e aggiornati.
Il totale di Materia Horizon comprende: