Cross-reference tables for DIN aluminium wrought alloys: Part Two
Abstract
This technical guide presents comprehensive cross-reference tables mapping alphanumeric and numeric temper designations for wrought aluminum alloys according to DIN 1745, DIN 1746, and DIN 1747 standard specifications. The document focuses on three main categories: plates, sheets, and strips (thickness >0.35mm); tubes; and rods and bars. Each section provides detailed correlations between Kurzzeichen (alphanumeric designations) and Werkstoff-nummer (numeric designations) for various aluminum alloy compositions and their respective temper states.
Introduction to DIN Aluminum Alloy Classifications
The DIN (Deutsches Institut für Normung) system provides standardized designations for aluminum alloys used in various industrial applications. This document serves as a comprehensive reference guide for correlating different designation systems, enabling proper material selection and specification.
Plate, Sheet, and Strip Specifications (DIN 1745)
This section covers aluminum and aluminum alloy products with thickness exceeding 0.35mm. The specifications include various alloy compositions ranging from high-purity aluminum (Al99,8) to complex alloy systems containing zinc, magnesium, and copper.
Table 1. DIN 1745 Specifications
| Alphanumeric designation (Kurzzeichen) | Numeric designation (Werkstoff-nummer) |
|
| Al99,8 | W6 | 3.0285.10 |
| F6 | .07 | |
| F8 | .24 | |
| G8 | .25 | |
| F10 | .26 | |
| F12 | .30 | |
| F14 | .32 | |
| Al99,7 | W6 | 3.0275.10 |
| F6 | .07 | |
| F8 | .24 | |
| G8 | .25 | |
| F10 | .26 | |
| F12 | .30 | |
| F14 | .32 | |
| Al99,5 | W7 | 3.0255.10 |
| W7 | .10 | |
| F8 | .07 | |
| F9 | .24 | |
| G9 | .25 | |
| F11 | .26 | |
| G11 | .27 | |
| F13 | .30 | |
| G13 | .31 | |
| F15 | .32 | |
| Al99 | W8 | 3.0205.10 |
| W8 | .10 | |
| F10 | .24 | |
| G10 | .25 | |
| F12 | .26 | |
| F14 | .30 | |
| F16 | .32 | |
| AlRMg0,5 | 3.3309 | |
| Al99,9Mg0,5 | 3.3308 | |
| Al99,85Mg0,5 | W8 | 3.3307.10 |
| F10 | .26 | |
| G10 | .27 | |
| F12 | .28 | |
| G12 | .29 | |
| F14 | .30 | |
| G14 | .31 | |
| F16 | .32 | |
| AlRMg1 | 3.3319 | |
| Al99,9Mg1 | 3.3318 | |
| Al99,85Mg1 | W10 | 3.3317.10 |
| F12 | .24 | |
| G12 | .25 | |
| F14 | .26 | |
| G14 | .27 | |
| F16 | .30 | |
| G16 | .31 | |
| F18 | .32 | |
| AlFeSi | W8 | 3.0915.10 |
| F13 | .26 | |
| G13 | .27 | |
| F17 | .30 | |
| F19 | .32 | |
| AlMn | W9 | 3.0515.10 |
| F12 | .24 | |
| F14 | .26 | |
| F17 | .30 | |
| F19 | .32 | |
| F21 | .34 | |
| AlMnCu | W10 | 3.0517.10 |
| F13 | .24 | |
| F15 | .26 | |
| F17 | .28 | |
| F19 | .30 | |
| AlMn1Mg1 | W16 | 3.0526.10 |
| F19 | .24 | |
| G19 | .25 | |
| F22 | .26 | |
| G22 | .27 | |
| F24 | .28 | |
| G24 | .29 | |
| F26 | .30 | |
| G26 | .31 | |
| AlMg1 | W10 | 3.3315.10 |
| F13 | .24 | |
| G13 | .25 | |
| F15 | .26 | |
| G15 | .27 | |
| F17 | .28 | |
| G17 | .29 | |
| F19 | .30 | |
| G19 | .31 | |
| F21 | .32 | |
| AlMg1,5 | W13 | 3.3316.10 |
| F16 | .24 | |
| G16 | .25 | |
| F18 | .26 | |
| G18 | .27 | |
| F20 | .28 | |
| G20 | .29 | |
| F23 | .30 | |
| G23 | .31 | |
| F25 | .32 | |
| AlMg2,5 | W17 | 3.3523.10 |
| F21 | .24 | |
| G21 | .25 | |
| F23 | .26 | |
| G23 | .27 | |
| F25 | .28 | |
| G25 | .29 | |
| F27 | .30 | |
| G27 | .31 | |
| AlMg3 | W19 | 3.3535.10 |
| W19 | .10 | |
| F19 | .07 | |
| F20 | .07 | |
| F21 | .07 | |
| F22 | .24 | |
| G22 | .25 | |
| F24 | .26 | |
| G24 | .27 | |
| F27 | .28 | |
| G27 | .29 | |
| F29 | .30 | |
| G29 | .31 | |
| AlMg2Mn0,3 | W16 | 3.3525.10 |
| F19 | .24 | |
| G19 | .25 | |
| F21 | .26 | |
| G21 | .27 | |
| F23 | .28 | |
| G23 | .29 | |
| F26 | .30 | |
| G26 | .31 | |
| AlMg2Mn0,8 | W19 | 3.3527.10 |
| W19 | .10 | |
| F19 | .07 | |
| F20 | .07 | |
| F21 | .07 | |
| F22 | .24 | |
| G22 | .25 | |
| F24 | .26 | |
| G24 | .27 | |
| F27 | .28 | |
| G27 | .29 | |
| F29 | .30 | |
| G29 | .31 | |
| AlMg2,7Mn | F22 | 3.3537.07 |
| F22 | .07 | |
| G25 | .25 | |
| G25 | .25 | |
| G27 | .27 | |
| G27 | .27 | |
| AlMg4Mn | W24 | 3.3545 |
| W24 | .10 | |
| F24 | .07 | |
| F28 | .24 | |
| G28 | .25 | |
| F30 | .26 | |
| G30 | .27 | |
| F33 | .28 | |
| G33 | .29 | |
| F35 | .30 | |
| AlMg4,5Mn | W28 | 3.3547.10 |
| F27 | .07 | |
| G31 | .25 | |
| G35 | .27 | |
| AlMgSi0,8 | F20 | 3.2316.51 |
| F28 | .71 | |
| AlMgSi1 | W | 3.2315.10 |
| F21 | .51 | |
| F21 | .51 | |
| F28 | .71 | |
| F28 | .71 | |
| F32 | .72 | |
| F30 | .72 | |
| F30 | .72 | |
| AlCu2Mg0,5 | F27 | 3.1303.51 |
| AlCuMg1 | W | 3.1325.10 |
| F40 | .51 | |
| F39 | .51 | |
| F39 | .51 | |
| AlCuMg2 | W | 3.1355.10 |
| F44 | .51 | |
| AlCuSiMn | W | 3.1255.10 |
| F40 | .51 | |
| F40 | .51 | |
| F39 | .51 | |
| F46 | .71 | |
| AlZn4,5Mg1 | F35 | 3.4335.71 |
| F34 | .71 | |
| AlZnMgCu0,5 | F45 | 3.4345.71 |
| F45 | .71 | |
| F43 | .71 | |
| F41 | .71 | |
| AlZnMgCu1,5 | F53 | 3.4365.71 |
| F53 | .71 | |
| F53 | .71 | |
| F50 | .71 | |
| F48 | .71 | |
| F48 | .71 | |
Tube Specifications and Properties (DIN 1746)
The tube specifications cover a wide range of aluminum alloys suitable for various tubular applications. These designations are specifically tailored for hollow profiles and their unique processing requirements.
Table 2. DIN 1746 Specifications
| Alphanumeric designation (Kurzzeichen) | Numeric designation (Werkstoff-nummer) |
|
| Al99,8 | F6 | 3.0285.08 |
| W6 | .10 | |
| F9 | .26 | |
| F11 | .30 | |
| Al99,5 | F7 | 3.0255.08 |
| W7 | .10 | |
| F10 | .26 | |
| F13 | .30 | |
| Al99 | F8 | 3.0205.08 |
| W8 | .10 | |
| F11 | .26 | |
| F14 | .30 | |
| Al99,85Mg0,5 | F7 | 3.3307.08 |
| Al99,85Mg1 | F10 | 3.3317.08 |
| AlMn | F10 | 3.0515.08 |
| W10 | .10 | |
| F13 | .26 | |
| F16 | .28 | |
| AlMg1 | F10 | 3.3315.08 |
| W10 | .10 | |
| F14 | .26 | |
| F19 | .30 | |
| AlMg1,8 | F15 | 3.3326.08 |
| W15 | .10 | |
| F18 | .26 | |
| F22 | .30 | |
| AlMg3 | F18 | 3.3535.08 |
| W18 | .10 | |
| F25 | .26 | |
| AlMg5 | F25 | 3.555.08 |
| W25 | .10 | |
| F28 | .26 | |
| AlMg2Mn0,3 | F15 | 3.3525.08 |
| W15 | .10 | |
| F20 | .26 | |
| F24 | .30 | |
| AlMg2Mn0,8 | F20 | 3.3527.08 |
| W18 | .10 | |
| F25 | .26 | |
| AlMg4,5Mn | F27 | 3.3547.08 |
| W27 | .10 | |
| AlMgSi0,5 | F13 | 3.206.51 |
| F22 | .71 | |
| F25 | .72 | |
| AlMgSi0,8 | F28 | 3.2316.71 |
| AlMgSi1 | F21 | 2.2315.51 |
| F28 | .71 | |
| F31 | .72 | |
| AlMgSiPb | F20 | 3.0615.51 |
| F28 | .71 | |
| AlCuBiPb | F31 | 3.1655.51 |
| F29 | .51 | |
| F37 | .71 | |
| AlCuMgPb | F37 | 3.1645.51 |
| F36 | .51 | |
| AlCuMg1 | F38 | 3.1325.51 |
| F39 | .51 | |
| F37 | .51 | |
| AlCuMg2 | F41 | 3.1355.51 |
| F43 | .51 | |
| F42 | .51 | |
| AlCuSiMn | F45 | 3.1255.71 |
| AlZn4,5Mg1 | F35 | 3.4335.71 |
| AlZnMgCu0,5 | F47 | 3.4345.71 |
| AlZnMgCu1,5 | F51 | 3.4365.71 |
Rod and Bar Classifications (DIN 1747)
This section addresses solid profiles including rods and bars, providing temper designations specific to these product forms.
Table 3. DIN 1747 Specifications
| Alphanumeric designation (Kurzzeichen) | Numeric designation (Werkstoff-nummer) |
|
| Al99,8 | F6 | 3.0285.08 |
| W6 | .10 | |
| F9 | .26 | |
| F11 | .30 | |
| Al99,5 | F7 | 3.0255.08 |
| W7 | .10 | |
| F10 | .26 | |
| F13 | .30 | |
| Al99 | F8 | 3.0205.08 |
| W8 | .10 | |
| F11 | .26 | |
| F14 | .30 | |
| AlMn | F10 | 3.0515.08 |
| W10 | .10 | |
| F13 | .26 | |
| F16 | .28 | |
| AlMg1 | F10 | 3.3315.08 |
| W10 | .10 | |
| F14 | .26 | |
| F19 | .30 | |
| AlMg3 | F18 | 3.3535.08 |
| W18 | .10 | |
| F25 | .26 | |
| AlMg5 | F25 | 3.555.08 |
| W25 | .10 | |
| F26 | .24 | |
| F28 | .26 | |
| AlMg2Mn0,3 | F15 | 3.3525.08 |
| W15 | .10 | |
| F20 | .26 | |
| F24 | .30 | |
| AlMg2Mn0,8 | F20 | 3.3527.08 |
| W18 | .10 | |
| F25 | .26 | |
| AlMg4,5Mn | F27 | 3.3547.08 |
| W27 | .10 | |
| AlMgSi0,5 | F13 | 3.206.51 |
| F22 | .71 | |
| F25 | .72 | |
| AlMgSi0,8 | F28 | 3.2316.71 |
| AlMgSi1 | F21 | 2.2315.51 |
| F28 | .71 | |
| F31 | .72 | |
| F30 | .72 | |
| F27 | .72 | |
| AlMgSiPb | F20 | 3.0615.51 |
| F28 | .71 | |
| AlCuBiPb | F32 | 3.1655.51 |
| F30 | .51 | |
| F28 | .51 | |
| F37 | .71 | |
| AlCuMgPb | F37 | 3.1645.51 |
| F34 | .51 | |
| AlCuMg1 | F38 | 3.1325.51 |
| F40 | .51 | |
| F36 | .51 | |
| F33 | .51 | |
| AlCuMg2 | F44 | 3.1355.51 |
| F47 | .51 | |
| F40 | .51 | |
| AlCuSiMn | F45 | 3.1255.71 |
| F46 | .71 | |
| F43 | .71 | |
| AlZn4,5Mg1 | F35 | 3.4335.71 |
| AlZnMgCu0,5 | F46 | 3.4345.71 |
| F49 | .71 | |
| F47 | .71 | |
| AlZnMgCu1,5 | F51 | 3.4365.71 |
| F52 | .71 | |
| F51 | .71 | |
| F50 | .71 | |
Trouvez en comparez en quelques instants les matériaux de différentes normes !
Total Materia Horizon contient des informations de propriétés détaillées et précises pour des centaines de milliers de matériaux normalisés du monde entier, mises à jour chaque mois.
Profitez d’un compte d’évaluation GRATUIT sur Total Materia Horizon et rejoignez notre communauté qui compte plus de 500.000 utilisateurs dans plus de 120 pays.