ASTM Standard List: Coated Steels

ASTM specifications represent a consensus among producers, specifiers, fabricators, and users of steel mill products. ASTM’s designation system for metals consists of a letter (A for ferrous materials) followed by an arbitrary sequentially assigned number. These designations often apply to specific products, for example A548 is applicable to cold-heading quality carbon steel wire for tapping or sheet metal screws.

This article contains a list of standards that covers among other things:

  • Metallic coated carbon steel wire coated at size for mechanical springs
  • Composite ribbed steel pipe, pre-coated and polyethylene lined sewer pipe application
  • Flexible poly (vinyl chloride) (PVC) gaskets used in connection of water closets to sanitary drainage system

 

For more information on the ASTM designation system see our related article:
Introduction to the ASTM Standard Designation.

 

Coated steels

 

Standard
Number
Last
version
Description Status
A 53/A 53M 2007 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless /5/
A 93   Zinc-Coated Galvanized Iron or Steel Sheets, Boils, and Butt Lengths Replaced by A 525 /no materials/
A 111 2004 Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire /no materials/
A 112   Zinc-Coated (Galvanized) Steel Tie wires Withdrawn 1990 /no materials/
A 116 2005 Metallic-Coated, Steel Woven Wire Fence Fabric /no materials/
A 117 1956 Zinc-Coated Iron or Steel Chain-Link Fence Fabric Galvanized After Wearing Replaced by A392 /no materials/
A 118   Zinc-Coated Iron or Steel Chain-Link Fence Fabric Galvanized Before Wearing Withdrawn 1933 /no materials/
A 120 1984 Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses Withdrawn 1987 /no materials/
A 121 2007 Metallic-Coated Carbon Steel Barbed Wire /no materials/
A 122   Zinc-Coated Steel Wire Strand (Galvanized) and Class A Extra Galvanized Withdrawn 1963 /no materials/
A 123/A 123M 2009 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products /no materials/
A 143/A 143M 2007 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement /no materials/
A 153/A 153M 2009 Zinc Coating (Hot-Dip) on Iron and Steel Hardware /no materials/
A 163   Zinc-Coated (Galvanized) Wrought Iron Sheets Withdrawn 1972 /no materials/
A 164   Electrodeposited Coatings of Zinc on Steel Replaced by B 633 /no materials/
A 165   Electrodeposited Coatings of Cadmium on Steel Replaced by B 766 /no materials/
A 166   Electrodeposited Coatings of Nickel and Chromium on Steel Replaced by B 456 /no materials/
A 218   Zinc-Coated Steel Wire Strand (Class B and Class C Coatings) Replaced by A 475 /no materials/
A 239 2009 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles /no materials/
A 267   Lead Coating (Hot-Dip) on Iron or Steel Hardware Withdrawn 1954 /no materials/
A 308/A 308M 2006 Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process /22/
A 326   Zinc-Coated (Galvanized) High Tensile Steel Telephone and Telegraph Line Wire Withdrawn 1990 /no materials/
A 337   Zinc-Coated Iron or Steel Chain-link Fence Fabric Galvanized before Weaving Replaced by A 392 /no materials/
A 361/A 361M 1994 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding Withdrawn 1995 /no materials/
A 363 2003 Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand /no materials/
A 384/A 384M 2007 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies /no materials/
A 385 2009 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) /no materials/
A 386   Zinc Coating (Hot-Dip) on Assembled Steel Products Replaced by A 123/A123M /no materials/
A 387/A 387M 2006 Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum /18/
A 390 2006 Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) /no materials/
A 392 2007 Zinc-Coated Steel Chain-Link Fence Fabric /no materials/
A 394 2008 Steel Transmission Tower Bolts, Zinc-Coated and Bare /1/
A 411 2008 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire /no materials/
A 444/A 444M 1989 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Storm Sewer and Drainage Pipe Replaced by A 929/A 929M /no materials/
A 446/A 446M 1993 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality Replaced by A 653/A 653M /7/
A 459 2008 Zinc-Coated Flat Steel Armoring Tape /1/
A 463/A 463M 2009 Steel Sheet, Aluminum-Coated, by the Hot-Dip Process /27/
A 464   Recommended Practice for Use of Magnetic Type Instruments for Measurement of Thickness of Hot-Dip Zinc Coatings on Iron and Steel Replaced by A 376/A 376M /no materials/
A 474 2008 Aluminum-Coated Steel Wire Strand /no materials/
A 475 2003 Zinc-Coated Steel Wire Strand /no materials/
A 491 2007 Aluminum-Coated Steel Chain-Link Fence Fabric /no materials/
A 525 1993 General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process Replaced by A 653/A 653M /no materials/
A 525M 1991 General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Replaced by A 653/A 924 /no materials/
A 526/A 526M 1990 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality Replaced by A 653/A 653M /1/
A 527/A 527M 2001 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality Replaced by A 653/A 653M
A 528/A 528M 1990 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process Drawing Quality Replaced by A 653/A 653M /1/
A 562/A 562M 2006 Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings /1/
A 584 1997 Aluminum-Coated Steel Woven Wire Fence Fabric Replaced by A 116 /no materials/
A 585 2002 Aluminum-Coated Steel Barbed Wire /no materials/
A 586 2009 Zinc-Coated Parallel and Helical Steel Wire Structural Strand /3/
A 591/A 591M 1998 Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications Replaced by A 879 /60/
A 599/A 599M 2007 Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet /no materials/
A 603 2009 Zinc-Coated Steel Structural Wire Rope /3/
A 623 2008 Tin Mill Products, General Requirements /no materials/
A 623M 2009 Tin Mill Products, General Requirements [Metric] /3/
A 624/A 624M 2008 Tin Mill Products, Electrolytic Tin Plate, Single Reduced /no materials/
A 625/A 625M 2008 Tin Mill Products, Black Plate, Single Reduced /no materials/
A 625M 1985 Tin Mill Products, Black Plate, Single Reduced. (Metric) Replaced by A 625/A 625M /no materials/
A 626/A 626M 2008 Tin Mill Products, Electrolytic Tin Plate, Double Reduced /no materials/
A 640 2009 Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable /no materials/
A 641/A 641M 2009 Zinc-Coated (Galvanized) Carbon Steel Wire /3/
A 642/A 642M   Steel Sheet, Zinc-Coated (Galvanized) by the Hot Dip Process, Drawing Quality, Special Killed Replaced by A 653/A 653M /no materials/
A 650/A 650M 2008 Tin Mill Products, Black Plate, Double Reduced /no materials/
A 653/A 653M 2009 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process /72/
A 657/A 657M 2008 Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced /no materials/
A 676 1972 Hot-Dipped Aluminum Coatings on Ferrous Articles Withdrawn 1987 /no materials/
A 741 2009 Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail /no materials/
A 742/A 742M 2008 Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe /no materials/
A 755/A 755M 2008 Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products /no materials/
A 760/A 760M 2009 Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains /no materials/
A 761/A 761M 2009 Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches /no materials/
A 762/A 762M 2008 Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains /no materials/
A 764 2007 Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs /1/
A 767/A 767M 2009 Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement /no materials/
A 775/A 775M 2007 Epoxy-Coated Steel Reinforcing Bars /no materials/
A 780 2009 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings /no materials/
A 783 1981 Aluminum-Zinc-Alloy-Coated Steel Chain Link Fence Fabric Withdrawn 1986 /no materials/
A 784 1981 Aluminum-Zinc Alloy-Coated Steel Wire Rope and Fittings for Highway Guard Rail Withdrawn 1987 /no materials/
A 785 1981 Aluminum-Zinc Alloy-Coated Wire Strand Withdrawn 1987 /no materials/
A 787 2009 Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing /13/
A 791/A 791M 1994 Aluminum-Zinc Alloy-Coated Wire Strand Replaced by A268/A268M /10/
A 792/A 792M 2009 Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process /28/
A 792M 1993 Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process, General Requirements (Metric) Replaced by A792/A792M /no materials/
A 795/A 795M 2008 Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use /2/
A 797 1982 Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand Withdrawn 1990 /no materials/
A 809 2008 Aluminum-Coated (Aluminized) Carbon Steel Wire /1/
A 810 2009 Zinc-Coated (Galvanized) Steel Pipe Winding Mesh /no materials/
A 816/A 816M 1991 Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, High-Strength, Low Alloy Replaced by A653/A654M /no materials/
A 817 2007 Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire /no materials/
A 819 1990 Steel Sheet, Aluminum-Coated Type 2 for Storm Sewer and Drainage Pipe Replaced by A929/A929M /no materials/
A 824 2007 Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence /no materials/
A 825 1984 Steel Sheet, Composite Coated for Corrugated Steel Sewer Pipe and Bin Type Retaining Walls Withdrawn 1990
A 849 2005 Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe /no materials/
A 854/A 854M 2008 Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire /no materials/
A 855/A 855M 2009 Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand /no materials/
A 856/A 856M 2003 Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire /3/
A 862/A 862M 2008 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe /no materials/
A 863 1986 Corrugated Steel Pipe with Smooth PVC Liner for Seweres and Drains Withdrawn 1990 /no materials/
A 865/A 865M 2006 Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints /1/
A 875/A 875M 2009 Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process /22/
A 879/A 879M 2006 Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface /no materials/
A 882/A 882M 2004 Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand /no materials/
A 884/A 884M 2006 Epoxy-Coated Steel Wire and Welded Wire Reinforcement /no materials/
A 885/A 885M 2002 Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe Withdrawn 2005 /no materials/
A 899 2007 Steel Wire, Epoxy-Coated /no materials/
A 916 1993 Steel Sheet, Zinc-5% Aluminum-Mischmetal Alloy-Coated by Hot-Dip Process for Storm Sewer and Drainage Pipe Replaced by A929/A929M /no materials/
A 917 2008 Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) /no materials/
A 918 2006 Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface /no materials/
A 924/A 924M 2009 General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process /no materials/
A 925 2009 Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand /no materials/
A 929/A 929M 2007 Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe /1/
A 933/A 933M 2007 Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement /no materials/
A 934/A 934M 2007 Epoxy-Coated Prefabricated Steel Reinforcing Bars /no materials/
A 950/A 950M 2007 Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling /no materials/
A 972/A 972M 2004 Fusion Bonded Epoxy-Coated Pipe Piles /no materials/
A 974 2003 Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) /no materials/
A 975 2003 Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) /no materials/
A 976 2008 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application /no materials/
A 978/A 978M 2008 Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications /no materials/
A 1003/A 1003M 2009 Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members /3/
A 1004/A 1004M 2004 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members /no materials/
A 1019/A 1019M 2007 Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains /1/
A 1045 2008 Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System /no materials/
A 1046/A 1046M 2006 Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process /25/
A 1055 2008 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars /no materials/
A 1057/A 1057M 2008 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process /no materials/
A 1059/A 1059M 2008 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products /no materials/
B 606 2008 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced  
B 802/B 802M 2008 Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)  
B 803 2008 Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors  

 

Total Materia

April, 2011
Contactez-nous
Résolvez vos défis en matière de matériaux
Découvrez comment nous pouvons vous aider