NB NS3105 Nickel Alloys
Actualizaciones de datos
Este material cuenta con 112 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
NB NS3105 Composición química
NB/T 47046: 2015 / Níquel - placa de aleación de níquel para equipos a presión
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
NB NS3105 Propiedades físicas
Temperatura
Este material cuenta con 112 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
NB NS3105 Tratamiento Térmico
- Alloy plate should be in the solution heat treatment after aging heat treatment delivery. Mechanical properties can be obtained by any of the following methods:
- by adjusting the temperature at the end of rolling and the cooling conditions (the temperature at the end of rolling shall be as high as possible: greater than 970°C on the skin). The temperature at the end of rolling and the cooling conditions shall be recorded.
- by performing heat treatment after rolling at a temperature greater than 1000°C. The temperature shall be adjusted to obtain the mechanical properties required.
Additional heat treatment: The plates shall be subjected to heat treatment at 715°C±15°C for a minimum of 5 hours. - Final treatment for mechanical properties shall include heating at a temperature of between 1000°C and 1150°C, followed by rapid cooling. If the final forging or rolling temperature falls within the temperature limits specified for that treatment and provided that mechanical strength requirements are met, heat treatment in a furnace shall not be required. In this case, the final forging or rolling temperature and the cooling conditions shall be recorded.
NB NS3105 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
NB NS3105 Materiales Internacionales Equivalentes
Mostrando 7 de 12 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 12 internacionales equivalentes?
Consulte los grados 12 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 12Referencias cruzadas
- 44Composición
- 45Propiedades mecánicas
- 3Propiedades físicas
- 3Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- 1Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 4Proveedores Totales