NBR 6005A Aleaciones de aluminio
Actualizaciones de datos
Este material cuenta con 227 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
NBR 6005A Composición química
NBR 15197: 2011 / Aleaciones de aluminio - planchas, formas y remaches para carrocería de furgoneta - requisitos
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
NBR 6005A Propiedades físicas
Temperatura
Este material cuenta con 227 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
NBR 6005A Tratamiento Térmico
- Recommended homogenization treatment at 530-570 (+/- 10°C) The tolerance range of the selected treatment temperature should be used when the table of temperature variation range is greater than 20°C. 4h treatment time refers to the time when the core material should remain on the set temperature. This time should be adjusted according to the size and load characteristics to be treated and the homogenizing furnace. In this time, it should be added that the time required for all furnace data points indicating the lower limit of the treatment group (recovery time) for any load mass reaches that temperature. These times are determined based on thermal surveys of equipment and size of specific load. Higher temperatures for the materials to be solubilized in a press and lower for materials for solu-bilization in the oven.
NBR 6005A Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
NBR 6005A Materiales Internacionales Equivalentes
Mostrando 15 de 77 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 77 internacionales equivalentes?
Consulte los grados 77 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 77Referencias cruzadas
- 59Composición
- 42Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- 2Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 43Proveedores Totales