Lloyds LR Type 540 Aceros de fundición
Actualizaciones de datos
Este material cuenta con 41 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
Lloyds LR Type 540 Composición química
Rules for the Manufacture, Testing and Certification of Materials, Chapter 4 Section 3; Steel Castings; Castings for machinery construction, Lloyd's Register, 2025
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
Lloyds LR Type 540 Tratamiento Térmico
- Castings are to be supplied:
a) Normalised; or
b) Normalised and tempered at a temperature of not less than 550°C; or
c) Quenched and tempered at a temperature of not less than 550°C.
Engine bedplate castings, turbine castings and any other castings where dimensional stability and freedom from internal stresses are important, are to be given a stress relief heat treatment. This is to be at a temperature not lower than 550°C, followed by furnace cooling to 300°C or lower. Alternatively, full annealing may be used provided that the castings are furnace cooled to 300°C or lower. - Castings are to be supplied:
Fully annealed
Normalised or
Normalised and tempered at a temperature of not less than 550°C or
Quenched and tempered at a temperature of not less than 550°C
Lloyds LR Type 540 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
Lloyds LR Type 540 Materiales Internacionales Equivalentes
Mostrando 9 de 9 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 9 internacionales equivalentes?
Consulte los grados 9 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 9Referencias cruzadas
- 18Composición
- 12Propiedades mecánicas
- -Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales