TCVN C16R Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 8752 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
TCVN C16R Composición química
TCVN 12142-3: 2017 / Aceros térmicamente tratables, aceros aleados y aceros de corte libre - Parte 3: Aceros para cementación
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
TCVN C16R Propiedades físicas
Temperatura
Este material cuenta con 8752 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
TCVN C16R Tratamiento Térmico
- Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual).
Direct and simple hardening at 830-870°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures).
Double hardening: Core-hardening at 880-920°C and Case-hardening at 780-820°C
Tempering at 150-200°C (Time for tempering as a guide: 1h minimum).
TCVN C16R Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
TCVN C16R Materiales equivalentes internacionales
Mostrando 15 de 84 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 84 equivalentes internacionales?
Consulte los 84 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 84Referencias cruzadas
- 18Composición
- 31Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- 83Uniones
- -Revestimientos
- -Dimensiones
- 1Tribología
- 8491Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 40Proveedores Totales