TCVN 10SPb20 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 205 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
TCVN 10SPb20 Composición química
TCVN 12142-4: 2017 / Aceros térmicamente tratables, aceros aleados y aceros de corte libre - Parte 4: Aceros de corte libre
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
TCVN 10SPb20 Propiedades físicas
Temperatura
Este material cuenta con 205 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
TCVN 10SPb20 Tratamiento Térmico
- The temperatures are for guidance, but the actual temperatures chosen shall be those that will give the properties required.
Carburizing temperature: 880-980°C.
The carburizing temperature will depend on the chemical composition of the steel, the mass of the product, and the carburizing medium. If the steels are directly hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures, for example, 1020°C to 1050°C, are not unusual.
Direct and simple hardening temperature: 830-870°C
Double hardening:
Core-hardening temperature: 880-920°C
Case-hardening temperature: 780-820°C
Quenching agent: water, oil, emulsion. The kind of quenching agent depends, for example, on the shape of the products, the cooling conditions, and the quantity of furnace filling.
Tempering: 150-200°C for 1 hour minimum (as a guide).
TCVN 10SPb20 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
TCVN 10SPb20 Materiales equivalentes internacionales
Mostrando 15 de 110 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 110 equivalentes internacionales?
Consulte los 110 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 110Referencias cruzadas
- 12Composición
- 31Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 48Proveedores Totales