PROPRIETARY HG 2550 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY HG 2550 Composición química
Cold Work Tool Steels, HG2510, Huang Limited, 2017
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY HG 2550 Propiedades físicas
Temperatura
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY HG 2550 Tratamiento Térmico
- Forging:
Heat slowly and begin forging at 850-1050°C, after forging cool slowly preferably in a furnace.
Soft Annealing:
Annealing must be performed after hot working and before re-hardening. Heat at a rate not exceeding 400°F per hour (222°C per hour) to 1425 – 1475°F (773 – 801°C), and hold at temperature for 1 hour per inch (25.4mm) of maximum thickness; 2 hours minimum. Then cool slowly with the furnace at a rate not exceeding 50°F per hour (28°C per hour) to 1000°F (538°C). Continue cooling to ambient temperature in the furnace or in air.
Stress Relieving:
Annealing must be performed after hot working and before re-hardening.
Hardening:
Preheating:
Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677°C) and equalize. Then heat to 1300-1400°F (704-760°C) and equalize. For simple geometries, use only the second preheating temperature range.
Austenitizing (High Heat): Heat slowly from the preheat. For Oil Quenching: 1600 – 1700°F (871 – 927°C) For Water Quenching: 1550 – 1650°F (842 – 899°C) Soak for 30 minutes for the first inch (25.4 mm) of thickness, plus 15 minutes for each additional inch (25.4 mm) of thickness.
Quenching:
Oil or water to 150-125°F (66-51°C).
Tempering:
Temper immediately after quenching. Hold at temperature for 1 hour per inch (25.4 mm) of thickness, 2 hours minimum, then air cool to ambient temperature. The typical tempering range is 300 to 600°F (149 to 316°C). Double tempering is recommended for tempering temperatures of 900°F (482°C) and higher.
PROPRIETARY HG 2550 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY HG 2550 Materiales Internacionales Equivalentes
Mostrando 15 de 73 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 73 internacionales equivalentes?
Consulte los grados 73 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 73Referencias cruzadas
- 8Composición
- 1Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 56Proveedores Totales