PROPRIETARY 9% Nickel Steel Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 489 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY 9% Nickel Steel Composición química
Arcelor Mittal, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY 9% Nickel Steel Propiedades físicas
Temperatura
Este material cuenta con 489 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY 9% Nickel Steel Tratamiento Térmico
- Heat treated either by double normalizing and tempering (NNT) or quenching and tempering (Q&T). The tempering is conducted within a restricted range, that results in the formation of a small amount (5-15%) of metallurgically stable retained austenite, which is very important in developing the superior cryogenic toughness of the steels.
Double normalized and tempered (A353):
- 1650ºF + 1450ºF + (1050 -1125ºF) 899ºC + 788ºC + (566 - 607ºC),
Quenched and tempered (A553):
- 1475ºF + (1050 - 1125ºF) 802ºC + (566 - 607ºC).
The post heat treatment within the range of 1025-1085ºF (551-583ºC), but not exceeding the tempering temperature, holding at temperature for one hour per inch of thickness, followed by cooling at a rate no less than 300ºF(167ºC) per hour. Slower cooling rates may reduce the notch toughness of the steel.
PROPRIETARY 9% Nickel Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY 9% Nickel Steel Materiales equivalentes internacionales
Mostrando 15 de 160 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 160 equivalentes internacionales?
Consulte los 160 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 160Referencias cruzadas
- 6Composición
- 149Propiedades mecánicas
- 23Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 17Esfuerzo-Deformación
- 1Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 132Proveedores Totales