ASME SA-553 Type III Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type III Composición química
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type III Propiedades físicas
Temperatura
Este material cuenta con 143 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type III Tratamiento Térmico
- All plates shall be heat treated by heating to a suitable temperature within the range of 800 to 925°C (1475 to 1700°F), holding for a sufficient time to obtain uniform temperature throughout the plate thickness and then quenching in water. Subsequently the plates shall be tempered within the range from 540 to 615°C (1000 to 1125°F), holding at this temperature for a minimum of 1,2 min/mm of thickness but not less than 15 min, and cool in air or water quench at a rate not less than 165°C/h (300°F/h).
Prior to the tempering treatment, the plates may be subjected to an intermediate heat treatment consisting of heating to a temperature in the range from 650 to 720°C (1205 to 1330°F); holding at that temperature for a suitable time, but in no case less than 15 min, and then water-quenching to below 150°C (300°F) in the case of plate thicknesses of more than 16 mm or cooling in air or water-quenching to below 150°C (300°F) in the case of plate thicknesses of 16 mm and under.
ASME SA-553 Type III Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME SA-553 Type III Materiales Internacionales Equivalentes
Mostrando 3 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 8Composición
- 9Propiedades mecánicas
- 74Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 1Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 12Bicho raro
- -Uniones
- -Revestimientos
- 34Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales